Playing with bios settings mostly related to my graphics for the thrill of it, and to see if any changes would be noticable. Everything seemed fine, I rebuilt kernel and world, and then a reboot seemed to cause a panic. Even though I am sure that nothing changed in my mildly customized kernel configuration, something seemed to be different because choosing the prior kernel from the menu booted to the login prompt just fine.
I looked around a bit more. Not long ago I had a conflict with vmm and virtualbox denying me access. It was the most peculiar problem that I couldn't solve by using a usb boot media device. The /boot and /etc directories were missing. My solution to booting was to disable the virtualization extension in bios, and then I could comment out the vmm and virtualbox lines in /etc/rc.conf and /boot/loader.conf which solved the problem.
The problem with booting now I believe I have solved with updating the amdgpu driver and drm-kmod. I had updated xlibre not many days prior so I left that alone. When I worked to update drm-kmod, I noticed that there exists graphics/drm-kmod-latest. I removed drm-kmod which is now about a year old which is a bit of a surprise. I decided to try graphics/drm-kmod-latest to see if this would work for me. After amdgpu driver and drm-kmod-latest were both installed, I had only to reboot to discover if what seemed to be a kernel issue would be cured.
I rebooted, chose the newer kernel that I had just updated, and nearly held my breath. The graphics transitions and console fonts display were different and I was able to reach the login prompt. Glorious success. A nice win after having no success with trying to use bhyve with either Windows 7 or Windows 11 installed from an iso for either. I expected Windows 11 would work better. A configuration for Windows 7 that let me see the installer boot screen and first menus didn't even let me see the Windows 11 boot screen.
I had spent a bunch of time trying to get the bios configured back to what it may have been when things worked decently. Now that everything is working I am not sure it had too much to do with it, but I might have brought everything back without being certain. I think I will still try tweaking some settings again, I am curious what 'drm psp' was about.
Output of dmesg shows me that there was some issues with graphics drivers, but these are the last two boots, one prior to my reinstalls and one after. There were other odd messages during boot while I was struggling that I do not see here. Once more I should have saved the dmesg output before doing anything to fix everything. It is easy to put the focus on getting everything working properly instead of documenting, I'm not sure I can react differently.
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-STABLE stable/15-f6f5d927bf75 ICHIGO amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 2560x1440
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.46-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 117435949056 (111995 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 2 3 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xcb9f3000-0xcb9f3017
smbios0: Entry point: v3 (64-bit), Version: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcba0000-0xfcba7fff at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 500 Series AHCI SATA controller> mem 0xfcb80000-0xfcb9ffff at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 82576> port 0xe020-0xe03f mem 0xfc820000-0xfc83ffff,0xfc400000-0xfc7fffff,0xfc844000-0xfc847fff at device 0.0 on pci4
igb0: EEPROM V1.2-1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: 98:b7:85:1f:b4:ea
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 82576> port 0xe000-0xe01f mem 0xfc800000-0xfc81ffff,0xfbc00000-0xfbffffff,0xfc840000-0xfc843fff at device 0.1 on pci4
igb1: EEPROM V1.2-1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: 98:b7:85:1f:b4:eb
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x7f80000000-0x7fbfffffff,0x7fc0000000-0x7fcfffffff,0xfcf00000-0xfcf7ffff at device 0.0 on pci8
hdac0: <ATI (0x15de) HDA Controller> mem 0xfcf88000-0xfcf8bfff at device 0.1 on pci8
pci8: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <AMD Raven USB 3.1 controller> mem 0xfcd00000-0xfcdfffff at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
xhci1: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG>
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
xhci2: <AMD Raven USB 3.1 controller> mem 0xfcc00000-0xfccfffff at device 0.4 on pci8
xhci2: 64 bytes context size, 64-bit DMA
xhci2: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG>
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD Raven HDA Controller> mem 0xfcf80000-0xfcf87fff at device 0.6 on pci8
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
uart: ns8250: UART FCR is broken (0x1)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1796702244 Hz quality 1000
Timecounters tick every 1.000 msec
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus2
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub2 on usbus0
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm3: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm4: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WCC6Y1RHTPZ6
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich4 bus 0 scbus4 target 0 lun 0
ada1: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada1: Serial Number WD-WCC6Y5JNVCXY
ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada2: Serial Number WD-WCC6Y0AX25U9
ada2: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 8 ports with 8 removable, self powered
uhub2: 14 ports with 14 removable, self powered
ugen1.2: <vendor 0x047d Kensington Expert Mouse> at usbus1
usbhid0 on uhub1
usbhid0: <vendor 0x047d Kensington Expert Mouse, class 0/0, rev 2.00/1.06, addr 1> on usbus1
hidbus0: <HID bus> on usbhid0
ugen1.3: <CHICONY HP Basic USB Keyboard> at usbus1
usbhid1 on uhub1
usbhid1: <CHICONY HP Basic USB Keyboard, class 0/0, rev 2.00/1.30, addr 2> on usbus1
hidbus1: <HID bus> on usbhid1
hkbd0: <CHICONY HP Basic USB Keyboard> on hidbus1
kbd2 at hkbd0
ugen0.2: <Realtek Bluetooth Radio> at usbus0
ugen1.4: <Sony WALKMAN> at usbus1
Root mount waiting for: usbus0
ugen0.3: <AsusTek Computer Inc. AURA LED Controller> at usbus0
usbhid2 on uhub2
usbhid2: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 2> on usbus0
hidbus2: <HID bus> on usbhid2
ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 3> on usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
TCP Hpts created 4 swi interrupt threads and bound 0 to cpus
Attempting to load tcp_bbr
tcp_bbr is now available
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x876B 0xC9).
[drm] register mmio base: 0xFCF00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <powerplay>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v9_0>
[drm] add ip block number 7 <sdma_v4_0>
[drm] add ip block number 8 <vcn_v1_0>
amdgpu/picasso_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_gpu_info.bin either
picasso_gpu_info.bin: could not load binary firmware /boot/firmware/picasso_gpu_info.bin either
amdgpu_picasso_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_gpu_info.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_gpu_info.bin'
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-PICASSO-118
amdgpu/picasso_asd.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_asd.bin either
picasso_asd.bin: could not load binary firmware /boot/firmware/picasso_asd.bin either
amdgpu_picasso_asd.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_asd.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_asd.bin'
amdgpu/picasso_ta.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_ta.bin either
picasso_ta.bin: could not load binary firmware /boot/firmware/picasso_ta.bin either
amdgpu_picasso_ta.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_ta.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_ta.bin'
amdgpu/picasso_pfp.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_pfp.bin either
picasso_pfp.bin: could not load binary firmware /boot/firmware/picasso_pfp.bin either
amdgpu_picasso_pfp.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_pfp.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_pfp.bin'
amdgpu/picasso_me.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_me.bin either
picasso_me.bin: could not load binary firmware /boot/firmware/picasso_me.bin either
amdgpu_picasso_me.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_me.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_me.bin'
amdgpu/picasso_ce.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_ce.bin either
picasso_ce.bin: could not load binary firmware /boot/firmware/picasso_ce.bin either
amdgpu_picasso_ce.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_ce.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_ce.bin'
amdgpu/picasso_rlc_am4.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_rlc_am4.bin either
picasso_rlc_am4.bin: could not load binary firmware /boot/firmware/picasso_rlc_am4.bin either
amdgpu_picasso_rlc_am4.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_rlc_am4.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_rlc_am4.bin'
amdgpu/picasso_mec.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_mec.bin either
picasso_mec.bin: could not load binary firmware /boot/firmware/picasso_mec.bin either
amdgpu_picasso_mec.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_mec.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec.bin'
amdgpu/picasso_mec2.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_mec2.bin either
picasso_mec2.bin: could not load binary firmware /boot/firmware/picasso_mec2.bin either
amdgpu_picasso_mec2.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_mec2.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec2.bin'
amdgpu/picasso_sdma.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_sdma.bin either
picasso_sdma.bin: could not load binary firmware /boot/firmware/picasso_sdma.bin either
amdgpu_picasso_sdma.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_sdma.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu/picasso_vcn.bin: could not load binary firmware /boot/firmware/amdgpu/picasso_vcn.bin either
picasso_vcn.bin: could not load binary firmware /boot/firmware/picasso_vcn.bin either
amdgpu_picasso_vcn.bin: could not load binary firmware /boot/firmware/amdgpu_picasso_vcn.bin either
drmn0: successfully loaded firmware image 'amdgpu/picasso_vcn.bin'
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 16384M 0x000000F400000000 - 0x000000F7FFFFFFFF (16384M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base
[drm] Detected VRAM RAM=16384M, BAR=16384M
[drm] RAM width 128bits DDR4
[drm] amdgpu: 16384M of VRAM memory ready
[drm] amdgpu: 57276M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F401E00000
amdgpu: hwmgr_sw_init smu backed is smu10_smu
amdgpu/raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu/raven_dmcu.bin either
raven_dmcu.bin: could not load binary firmware /boot/firmware/raven_dmcu.bin either
amdgpu_raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu_raven_dmcu.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
[drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
[drm] reserve 0x400000 from 0xf7ffc00000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
[drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
[drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
drmn0: Secure display: Generic Failure.drmn0: SECUREDISPLAY: query securedisplay TA failed. ret 0x0
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 1200000 in kHz, 4399 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3099 in mV
[drm] DM_PPLIB: 600000 in kHz, 3574 in mV
[drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[drm] Display Core v3.2.247 initialized on DCN 1.0
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
drmn0: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring gfx_low uses VM inv eng 1 on hub 0
drmn0: ring gfx_high uses VM inv eng 4 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 10 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 11 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 12 on hub 0
drmn0: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 8
drmn0: ring vcn_dec uses VM inv eng 1 on hub 8
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 8
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 8
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 8
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic2: <LinuxKPI I2C> on drm1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
[drm] Initialized amdgpu 3.54.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=2160 width=3840 depth=32
pbase=0x17d228000 vbase=0xfffffe05fec28000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=15360
end FB_INFO
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi3: cannot find EC device
acpi_wmi3: Embedded MOF found
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iic3: <I2C generic I/O> on iicbus3
acpi_wmi4: <ACPI-WMI mapping> on acpi0
acpi_wmi4: cannot find EC device
acpi_wmi4: Embedded MOF found
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
hms0: <vendor 0x047d Kensington Expert Mouse> on hidbus0
hms0: 5 buttons and [XYW] coordinates ID=0
igb0: link state changed to UP
lo0: link state changed to UP
igb0: link state changed to DOWN
igb0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
pid 97686 (endless-sky), jid 0, uid 1001: exited on signal 6 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 15m5s
uhub0: detached
hms0: detached
hidbus0: detached
usbhid0: detached
hkbd0: detached
hidbus1: detached
usbhid1: detached
uhub1: detached
[drm] psp gfx command UNLOAD_TA(0x2) failed and response status is (0x117)
igb0: link state changed to DOWN
hidbus2: detached
usbhid2: detached
uhub3: detached
uhub2: detached
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.1-PRERELEASE stable/15-7dcfbf4a8bf3 ICHIGO amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 2560x1440
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.37-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 117435944960 (111995 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 3 2 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xcb9f3000-0xcb9f3017
smbios0: Entry point: v3 (64-bit), Version: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcba0000-0xfcba7fff at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 500 Series AHCI SATA controller> mem 0xfcb80000-0xfcb9ffff at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 82576> port 0xe020-0xe03f mem 0xfc820000-0xfc83ffff,0xfc400000-0xfc7fffff,0xfc844000-0xfc847fff at device 0.0 on pci4
igb0: EEPROM V1.2-1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: 98:b7:85:1f:b4:ea
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 82576> port 0xe000-0xe01f mem 0xfc800000-0xfc81ffff,0xfbc00000-0xfbffffff,0xfc840000-0xfc843fff at device 0.1 on pci4
igb1: EEPROM V1.2-1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: 98:b7:85:1f:b4:eb
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x7f80000000-0x7fbfffffff,0x7fc0000000-0x7fcfffffff,0xfcf00000-0xfcf7ffff at device 0.0 on pci8
hdac0: <ATI (0x15de) HDA Controller> mem 0xfcf88000-0xfcf8bfff at device 0.1 on pci8
pci8: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <AMD Raven USB 3.1 controller> mem 0xfcd00000-0xfcdfffff at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
xhci1: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG>
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
xhci2: <AMD Raven USB 3.1 controller> mem 0xfcc00000-0xfccfffff at device 0.4 on pci8
xhci2: 64 bytes context size, 64-bit DMA
xhci2: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG>
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD Raven HDA Controller> mem 0xfcf80000-0xfcf87fff at device 0.6 on pci8
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
uart: ns8250: UART FCR is broken (0x1)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1796706483 Hz quality 1000
Timecounters tick every 1.000 msec
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus2
uhub1 on usbus0
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2 on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm3: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm4: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WCC6Y1RHTPZ6
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich4 bus 0 scbus4 target 0 lun 0
ada1: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada1: Serial Number WD-WCC6Y5JNVCXY
ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WD10EZEX-08WN4A1 03.01A03> ACS-3 ATA SATA 3.x device
ada2: Serial Number WD-WCC6Y0AX25U9
ada2: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub1: 14 ports with 14 removable, self powered
ugen1.2: <vendor 0x047d Kensington Expert Mouse> at usbus1
usbhid0 on uhub2
usbhid0: <vendor 0x047d Kensington Expert Mouse, class 0/0, rev 2.00/1.06, addr 1> on usbus1
hidbus0: <HID bus> on usbhid0
ugen1.3: <CHICONY HP Basic USB Keyboard> at usbus1
usbhid1 on uhub2
usbhid1: <CHICONY HP Basic USB Keyboard, class 0/0, rev 2.00/1.30, addr 2> on usbus1
hidbus1: <HID bus> on usbhid1
ugen0.2: <Realtek Bluetooth Radio> at usbus0
hkbd0: <CHICONY HP Basic USB Keyboard> on hidbus1
kbd2 at hkbd0
ugen1.4: <Sony WALKMAN> at usbus1
Root mount waiting for: usbus0
ugen0.3: <AsusTek Computer Inc. AURA LED Controller> at usbus0
usbhid2 on uhub1
usbhid2: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 2> on usbus0
hidbus2: <HID bus> on usbhid2
ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 3> on usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
TCP Hpts created 4 swi interrupt threads and bound 0 to cpus
Attempting to load tcp_bbr
tcp_bbr is now available
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x876B 0xC9).
[drm] register mmio base: 0xFCF00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <powerplay>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v9_0>
[drm] add ip block number 7 <sdma_v4_0>
[drm] add ip block number 8 <vcn_v1_0>
drmn0: successfully loaded firmware image 'amdgpu/picasso_gpu_info.bin'
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-PICASSO-118
drmn0: successfully loaded firmware image 'amdgpu/picasso_asd.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_ta.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_pfp.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_me.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_ce.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_rlc_am4.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec2.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
drmn0: successfully loaded firmware image 'amdgpu/picasso_vcn.bin'
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 16384M 0x000000F400000000 - 0x000000F7FFFFFFFF (16384M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base
[drm] Detected VRAM RAM=16384M, BAR=16384M
[drm] RAM width 128bits DDR4
[drm] amdgpu: 16384M of VRAM memory ready
[drm] amdgpu: 57276M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F401E00000
amdgpu: hwmgr_sw_init smu backed is smu10_smu
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
[drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
drmn0: reserve 0x400000 from 0xf7ffc00000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
drmn0: psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
drmn0: Secure display: Generic Failure.drmn0: SECUREDISPLAY: query securedisplay TA failed. ret 0x0
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 1200000 in kHz, 4399 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3099 in mV
[drm] DM_PPLIB: 600000 in kHz, 3574 in mV
[drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[drm] Display Core v3.2.273 initialized on DCN 1.0
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
drmn0: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 8
drmn0: ring vcn_dec uses VM inv eng 1 on hub 8
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 8
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 8
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 8
amdgpu: pp_dpm_get_sclk_od was not implemented.
amdgpu: pp_dpm_get_mclk_od was not implemented.
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic2: <LinuxKPI I2C> on drm1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
[drm] Initialized amdgpu 3.57.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=2160 width=3840 depth=32
pbase=0x171191000 vbase=0xfffffe05ff391000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=15360
end FB_INFO
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi3: cannot find EC device
acpi_wmi3: Embedded MOF found
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iic3: <I2C generic I/O> on iicbus3
acpi_wmi4: <ACPI-WMI mapping> on acpi0
acpi_wmi4: cannot find EC device
acpi_wmi4: Embedded MOF found
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
hms0: <vendor 0x047d Kensington Expert Mouse> on hidbus0
hms0: 5 buttons and [XYW] coordinates ID=0
igb0: link state changed to UP
lo0: link state changed to UP
igb0: link state changed to DOWN
igb0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)