I have mentioned previously that I have a rather extensive /etc/make.conf file. This very copiously commented file is below. In the past I defined many of the defaults listed but now accept many of those as defined by /usr/ports/Mk/bsd.default-versions.mk because some of the most current versions are set as default. Some other ports which may have ambiguous versions I choose to be specific or if the default is not as new as I wish, I set it. It is a very good idea to include comments where ever possible in any configuration file because you may want to note a documentation source as the reason or to recall why something was done.
Using this extensive make.conf it should default to any options defined within, if the config is removed (make rmconfig). Some things specifically set options, some options are defined in order to help avoid conflicts, especially when radio buttons are used. Many documentation excerpts from /usr/ports/Mk files. The bulk set/unset keywords assume that those keywords are consistent across disparite ports but where this is not true or other keywords are needed, those are options defined. it would be a very good idea to periodically revisit this file to see what needs adjusting. Check with each release and when noted in /usr/ports/updating when things change, especially defaults in /usr/ports/Mk/bsd.default-versions.mk to be sure the desired result is achieved.
### make.conf
#################################################################################################################################################
# There are a number of things you can do to reduce the size and number of files in /boot/kernel.
#
# Possibly the best space saving is to be had by setting WITHOUT_KERNEL_SYMBOLS in /etc/src.conf
# (if this file doesn't already exist, just create it), and the next time you installkernel, the
# debug symbol files won't be installed. It's safe to delete them now, if you need the space
# immediately (rm /boot/kernel/*.symbols)
#
# There are a few make.conf settings that control what modules are built:
#
# NO_MODULES - disable building of modules completely
# MODULES_OVERRIDE - specify the modules you want to build
# WITHOUT_MODULES - list of modules that should not be built
#
# The NO_MODULES option is probably a bit too heavy-handed, so a judicious combination of the
# other two is a better choice. If you know exactly which modules you want, you can simply set
# them in MODULES_OVERRIDE. Note that WITHOUT_MODULES is evaluated after MODULES_OVERRIDE, so
# any module named in both lists will not be built.
#
# If you really want to suppress building of all modules, you can use NO_MODULES, and ensure
# that all required drivers and modules are statically compiled into the kernel. Each driver's
# manpage shows the appropriate lines to add to your kernel config file, so you should be able
# to figure out what you need.
#################################################################################################################################################
#_______________________________________________________________________________
# |
# This toggle for developer helps to discover issues with ports building. It is |
# not used by poudriere, which would need testport or other options. |
#_______________________________________________________________________________|
DEVELOPER=yes
DISABLE_VULNERABILITIES=yes
TRYBROKEN=true
#_______________________________________________________________
# |
# USE_PACKAGE_DEPENDS=yes |
# |
# Try to install dependencies from existing packages instead |
# of building the port from scratch. Fallback on source |
# if an existing package is not present. |
# |
# USE_PACKAGE_DEPENDS_ONLY=yes |
# |
# Like USE_PACKAGE_DEPENDS, but do not fallback on source. |
#_______________________________________________________________|
USE_PACKAGE_DEPENDS=yes
#_______________________________________________________
# #
# Use ccache for builds #
#_______________________________________________________#
WITH_CCACHE_BUILD=yes
.if ${.CURDIR:M^/usr/src/}
CCACHE_DIR=/var/cache/base/ccache
.else
CCACHE_DIR=/var/cache/ccache
.endif
#_______________________________________________________________________________
# #
# This is set in /usr/ports/Mk/Uses/jpeg.mk #
# JPEG_PORT=graphics/jpeg-turbo #
#_______________________________________________________________________________#
#_______________________________________________________
# #
#WITH_DEBUG_PORTS+=editors/openoffice-devel #
#WITH_DEBUG_PORTS+=editors/openoffice-4 #
#_______________________________________________________#
#################################################################################################################################################
# _____________________________________________________________
# / \
# | Universal DEFAULT versions |
# | |
# | values defined in /usr/ports/Mk/bsd.default-versions.mk |
# \_____________________________________________________________/
#_______________________________________________________
# #
# No reason to set this as prefer llvm etc. #
# DEFAULT_VERSIONS+=gcc=12 #
#_______________________________________________________#
#_______________________________________________________
# #
# Ghostscript #
# Possible values: 10 #
# DEFAULT_VERSIONS+=GHOSTSCRIPT=10 #
#_______________________________________________________#
#_______________________________________________________
# #
# Possible values: mesa-libs, mesa-devel #
# GL_DEFAULT?= mesa-libs #
# DEFAULT_VERSIONS+=gl=mesa-libs #
#_______________________________________________________#
#_______________________________________________________
# #
# Imagemagick #
# Possible versions: 6, 7 #
# Possible flavors: x11, nox11 #
# (defaults to x11 if not specified) #
# Format: version[-flavor] #
# Examples: 6-nox11, 7 #
# #
# DEFAULT_VERSIONS+=IMAGEMAGICK=7 #
#_______________________________________________________#
#_______________________________________________________
# #
# Java #
# Possible values: 8, 11, 17, 18, 19, 20, 21 #
#_______________________________________________________#
DEFAULT_VERSIONS+=JAVA=21
#_______________________________________________________
# #
# centos or rocky linux both downstream rhel #
# centos is deprecated but has 32bit? #
# rocky is newer but 64bit only? #
# Possible values: c7 rl9 #
#_______________________________________________________#
DEFAULT_VERSIONS+=LINUX=rl9
#_______________________________________________________
# #
# llvm #
# Possible values: #
# 11, 12, 13, 14, 15, 16, 17, -devel #
# (to be used when non-base compiler is required) #
# #
#_______________________________________________________#
DEFAULT_VERSIONS+=LLVM=17
#_______________________________________________________
# #
# Lua #
# Possible values: 5.1, 5.2, 5.3, 5.4 #
# #
# DEFAULT_VERSIONS+=LUA=5.4 #
#_______________________________________________________#
#_______________________________________________________
# #
# Luajit #
# Possible values: #
# luajit, luajit-devel, luajit-openresty #
# #
# Auto sets to luajit-devel if not powerpc64* #
# #
# DEFAULT_VERSIONS+=LUAJIT=luajit-openresty #
#_______________________________________________________#
#_______________________________________________________
# Possible values: 3.8, 3.9, 3.10, 3.11 #
# #
# PYTHON_DEFAULT?= 3.11 #
# #
# Possible values: 2.7 #
# PYTHON2_DEFAULT?= 2.7 #
# #
# DEFAULT_VERSIONS+=python=3.11 #
#_______________________________________________________#
#_______________________________________________________
# #
# Ruby #
# Possible values: 2.7, 3.0, 3.1, 3.2 #
# #
# DEFAULT_VERSIONS+=RUBY=3.2 #
#_______________________________________________________#
#_______________________________________________________
# #
# Rust #
# While it may make some sense to have -nightly the #
# default, it is build fail prone or too new. #
# Possible values: rust, rust-nightly #
#_______________________________________________________#
DEFAULT_VERSIONS+=RUST=rust
#_______________________________________________________________________________
# #
# Would prefer libressl for all things but it tends to be incompatible with any #
# random thing periodically which breaks MANY ports. #
# libressl-devel is often too new for rust-nightly etc #
# #
# FYI: security/cryptopp is just as important for many ports. #
# py-cryptography #
# #
# When updating this, please also update the same list in ssl.mk and the checks #
# for USES=ssl in qa.sh! #
# Possible values: base, openssl, openssl111, openssl31, openssl32, openssl33, #
# libressl, libressl-devel #
#. if !defined(SSL_DEFAULT) #
# If no preference was set, check for an installed base version #
# but give an installed port preference over it. #
# SSL #
# Possible values: base, openssl, libressl, libressl-devel #
# #
# DEFAULT_VERSIONS+=SSL=openssl #
# #
# Do I have ssl in base built or denied? #
#_______________________________________________________________________________#
DEFAULT_VERSIONS+=SSL=openssl
#_______________________________________________________
# #
# tcl/tk #
# Possible values: 8.5, 8.6, 8.7 #
# #
# DEFAULT_VERSIONS+=TCLTK=8.6 #
#_______________________________________________________#
DEFAULT_VERSIONS+=TCLTK=8.7
#################################################################################################################################################
#_______________________________________________________
# #
# Changes in general to config toggles #
#_______________________________________________________#
OPTIONS_UNSET+=A4 ALSA APE APPLEDEV ARCHDEF ATK_BRIDGE ATLAS AVAHI AVX AVX2
OPTIONS_UNSET+=BASH BONMIN BOOTSTRAP
OPTIONS_UNSET+=CCL CHEESE CHINESE CHROMECAST CMUCL COLORD CPACK CPU_CLIP
OPTIONS_UNSET+=DBUS DEBUG DEVD DTRACE
OPTIONS_UNSET+=ECL EMACS_KEYS ENCODINGS ETERSOFT
OPTIONS_UNSET+=FAM FREERDP FRENCH
OPTIONS_UNSET+=GCRYPT GEOCLUE GEOIP GEOLOC GLX GNUTLS GNOMEUI GNOMEVFS GPERFTOOLS GPOD GPS GPSD GRAPHITE GRAPHVIZ
OPTIONS_UNSET+=HAL HALD
OPTIONS_UNSET+=IMOBILE INOTIFY INTEGER_SAMPLES IPOD IPOPT
OPTIONS_UNSET+=JACK JAPANESE
OPTIONS_UNSET+=KOREAN
OPTIONS_UNSET+=LAPACK LDAP LIBBLURAY LIBEXECINFO LIBJTE LIBSIGSEGV LIRC LOCALE_DE LOCALE_RU
OPTIONS_UNSET+=MAD MARS MDNS MDNSRESPONDER METRIC MHASH MTPFS MTPZ MUPDF
OPTIONS_UNSET+=NETTLE NLS NOTIFY NTSC NVIDIA NVIT NVTHREADS NVTT
OPTIONS_UNSET+=OPENBLAS OPENCV
OPTIONS_UNSET+=PAL PERL_64BITINT PGSQL PSGHOSTSCRIPT PSHYBRID PULSEAUDIO PURPOSE
OPTIONS_UNSET+=Q8BIT QPOASES QTWEBENGINE QT5AGGBACKEND
OPTIONS_UNSET+=RCC READLINE RUNROOT RUSSIAN RETEXTURE_FULL
OPTIONS_UNSET+=SAGE SAMBA SASL SCFB SMB SKYDRIVE SNDIO SOX SPEECHD SPEED STATIC
OPTIONS_UNSET+=TEST TOMCAT85 TOMCAT9 TPM
OPTIONS_UNSET+=UPNP
OPTIONS_UNSET+=V4L
OPTIONS_UNSET+=WEBENGINE WIIMOTEDEV WIKI_PUBLISHER
OPTIONS_UNSET+=XBACKLIGHT
OPTIONS_UNSET+=ZSH
#----------
OPTIONS_SET+=3DNOW 7ZIP
OPTIONS_SET+=A52 AALIB AAC ALLSTAGES ANY2DJVU AOM API APNG ARMOR ASM ASS AUDIO AUDIOCD
OPTIONS_SET+=BABEL BE_AMDGPU BEATPORT BE_NATIVE BOOST BROTLI BUNDLED_READLINE BZIP2
OPTIONS_SET+=CA_BUNDLE CACA CAIRO CBLAS CDDA2MP3 CDDA2OGG CDDB CERTS CLANG CLEARTYPE CLIENT COMPFACE COMPILER_RT COINMP CONFIG \
CONTRIB CPU_OPTS CRAFTY CRYPTO CRYPTOPP CUPS CURL
OPTIONS_SET+=DCA DCRAW DESKTOPFILES DRILL DTS DUNSTIFY DVD DYNAMIC_ARCH DYNSIMD
OPTIONS_SET+=EDITOR EGL ELMUSIC ELSOUND ENCHANT ETCSYMLINK EXAMPLES EXIV EXPAT EXR EXTRAFONTS EXTRAS EYECANDY
OPTIONS_SET+=FAAC FAAD FAIRYMAX FETCHART FFMPEG FFTW FFTW3 FLAC FLANG FLITE FLUID FLUIDSYNTH FONTCONFIG FORTRAN FREETYPE FREI0R \
FRIBIDI
OPTIONS_SET+=GAME GECKO GHOSTSCRIPT GIR GLASSFISH GLX GM GMP GNUCHESS GNUPG2 GOEMON GOLD GSL GSTREAMER GST_PLUGINS GUESTADDITIONS
OPTIONS_SET+=HARFBUZZ HUNSPELL HYPRE
OPTIONS_SET+=ICONV ICS_VCAL ID3TAG IJS IMAGEMAGICK IO_PTR IPV6 IRRLICHT
OPTIONS_SET+=JASPER JAVA JPEG2000 JSON
OPTIONS_SET+=KF5 KNIGHTCAP
OPTIONS_SET+=LADSPA LAME LARGE_STACK LASTFM LAUNCHER LCMS2 LHA LIBEDIT LIBEDIT_DL LIBFFI LIBPAPER LIBPLACEBO LIBPNG LIBRSVG2 LIBSSH2 \
LIBXML LIBYAML LIT LLD LLDB LLD_LINK LOCALE_EN LUAJIT LV2 LZ4 LZO
OPTIONS_SET+=MAN MAN3 MANPAGE MANPAGES MATERIALX MFX MIDI MIKMOD MLIR MMX MNG_OPTIMIZE MODPLUG MONO MP3 MP3OGG MPG123 MPEG2 MPI \
MT32EMU MTP MULTILIB MULTIPLICITY MUSEPACK MUSIC MYSQL
OPTIONS_SET+=NCURSES NETLIB NETTLE NONFREE NUMPY
OPTIONS_SET+=OBJC OGG OGRE ONIGURUMA OPENAL OPENAL_DLOPEN OPENCL OPENGL OPENH264 OPENJADE OPENMP OPENMPI OPTIMIZE OPTIMIZED_CFLAGS \
OPUS OSS
OPTIONS_SET+=PANGO PANGOCAIRO PARALLEL_MARK PERL_MALLOC PETSC PHALANX PHYSFS PNG POPPLER PSPOPPLER PTHREADS PYCLANG PYGMENTS PYMALLOC \
PYSTEMMER
#OPTIONS_SET+=QT5AGGBACKEND
OPTIONS_SET+=RAR RDOFF REALRTSP RELEASE RELRO REMIX1 REMIX2 REMIX3 REMIX4 REPLAYGAIN RETEXTURE RHASH RTCPU RUNTIME
OPTIONS_SET+=SAMPLERATE SBCL SCHROEDINGER SDL SDL1 SDL2 SDLCLIENT SDLGL SDL_AUDIO SDL_VIDEO SESSION_MGMT SHARED SHOUTCAST SIMD \
SIPHASH SKINS SLP SLURM SMPEG SNAPPY SOLUTIONS SOUND SOUNDTOUCH SPEEX SQLITE SSE SSE2 SSH STARTUP SUITESPARSE SVG \
SYSTEM_ZLIB
OPTIONS_SET+=TAGLIB TAGSOUP TCL THEMES THEORA THREADS TIDYHTML5 TIMIDITYPLUS TKINTER TOC2MP3 TWOLAME TZDATA TZUPDATE
OPTIONS_SET+=UDEV
OPTIONS_SET+=VAAPI VALA VDPAU VIDEOREC VIEWER VKD3D VLC VOICE VORBIS VPX VULKAN
OPTIONS_SET+=WATCHDOG WAVPACK WAYLAND WINEMAKER WXGTK
OPTIONS_SET+=X11 X264 X265 XCB XGLK XINERAMA
OPTIONS_SET+=YAML
OPTIONS_SET+=ZIP ZIPPY ZLIB ZSTD ZVBI
# ---------------------------------------------< End user additions and modifications >--------------------------------------------- #
#_______________________________________________________________________________________________________
# #
# * Openblas, Netlib (cblas), and Atlas are all options for math routines. #
# * cblas seems to be ovewhelmingly used with games, and by py-numpy. #
# therefore set to prefer cblas and netlib #
# #
# * qt-location is problematic and depended upon by qt-webengine #
# #
# * egl purported better and more supported than glx #
# libedit is BSD and lighter while readline is gpl/gnu -- better to use bundled readline than as port #
# #
# * rhash is MIT, gcrypt is gnu/gpl, mhash is lgpl #
# #
# * MTPFS and MTPZ are related to accessing mobile devices such as their internal storage. #
# #
# * NOTIFY option causes dbus to be installed #
#_______________________________________________________________________________________________________#
#_______________________________________________________________________________
# #
# processor instructions support #
# #
# older AMD processors do not have AVX or AVX2 #
# https://en.wikipedia.org/wiki/Advanced_Vector_Extensions#CPUs_with_AVX2 #
# AMD does have SSE2 #
# newer AMD processors do not have 3dNow #
#_______________________________________________________________________________#
############################################# ####### ####### ####### ###### ######
#### #### ####### ####### ####### ###### ######
#### an UNSET always overrides a SET #### ####### ####### ###### ###### ######
#### #### ####### ####### ####### ###### ######
############################################# ####### ####### ####### ###### ######
####################################################################
#### ####
#### OPTIONS_UNSET_FORCE overrides user interactive set ####
#### ####
####################################################################
#_______________________________________________________________________
# #
# Flavored ports -- this works as expected #
#_______________________________________________________________________#
.if ${.CURDIR:M*/ports/security/libressl-devel}
#FLAVOR=libtls
FLAVOR=default
.endif
.if ${.CURDIR:M*/ports/devel/git}
# FLAVOR=tiny
.endif
.if ${.CURDIR:M*/ports/x11-toolkits/wx}
FLAVOR=gtk3
.endif
.if ${.CURDIR:M*/ports/devel/bullet}
FLAVOR=
.endif
#_______________________________________________________________________
# #
# Flavored ports end #
#_______________________________________________________________________#
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Static needed for use with poudriere -- #
# revisit the memcached option when not experimental #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/ccache}
NO_CCACHE=yes
WITH_CCACHE_BUILD=no
.endif
.if ${.CURDIR:M*/ports/devel/ccache}
OPTIONS_UNSET=DOCS
OPTIONS_SET=CLANGLINK STATIC LLVMLINK
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# OpenSSL has many options, some unsafe #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
.if ${.CURDIR:M*/ports/security/openssl}
OPTIONS_SET+=ASYNC
OPTIONS_SET+=CT
OPTIONS_SET+=KTLS
OPTIONS_SET+=MAN3
OPTIONS_SET+=RFC3779
OPTIONS_SET+=SHARED
OPTIONS_SET+=ZLIB
OPTIONS_SET+=ARIA
OPTIONS_SET+=DES
OPTIONS_SET+=GOST
OPTIONS_SET+=IDEA
OPTIONS_UNSET+=SM4
OPTIONS_UNSET+=RC2
OPTIONS_UNSET+=RC4
OPTIONS_UNSET+=RC5
OPTIONS_UNSET+=WEAK-SSL-CIPHERS
OPTIONS_UNSET+=MD2
OPTIONS_UNSET+=MD4
OPTIONS_SET+=MDC2
OPTIONS_SET+=RMD160
OPTIONS_SET+=SM2
OPTIONS_SET+=SM3
OPTIONS_SET+=ASM
OPTIONS_SET+=SSE2
OPTIONS_SET+=THREADS
OPTIONS_SET+=EC
OPTIONS_SET+=NEXTPROTONEG
OPTIONS_SET+=SCTP
OPTIONS_UNSET+=SSL3
OPTIONS_SET+=TLS1
OPTIONS_SET+=TLS1_1
OPTIONS_SET+=TLS1_2
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# py-sphinx adjustments dunno why now #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/textproc/py-sphinx}
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}sphinxcontrib-devhelp>=0:textproc/py-sphinxcontrib-devhelp@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}sphinxcontrib-jsmath>=0:textproc/py-sphinxcontrib-jsmath@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}sphinxcontrib-htmlhelp>=2.0.0:textproc/py-sphinxcontrib-htmlhelp@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}sphinxcontrib-serializinghtml>=1.1.5:textproc/py-sphinxcontrib-serializinghtml@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}sphinxcontrib-qthelp>=0:textproc/py-sphinxcontrib-qthelp@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}Jinja2>=3.0:devel/py-Jinja2@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}pygments>=2.12:textproc/py-pygments@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}docutils>=0.14,1<0.20,1:textproc/py-docutils@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}snowballstemmer>=2.0:textproc/py-snowballstemmer@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}Babel>=2.9:devel/py-babel@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}alabaster>=0.7<0.8:textproc/py-alabaster@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}imagesize>=1.3:graphics/py-imagesize@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}requests>=2.5.0:www/py-requests@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}packaging>=21.0:devel/py-packaging@${PY_FLAVOR} \
${LOCALBASE}/share/certs/ca-root-nss.crt:security/ca_root_nss
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# force pkg to have default: DOCS #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/json-glib}
OPTIONS_SET+=DOCS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# force pkg to have default: GNUTLS #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/glib-networking}
OPTIONS_SET+=GNUTLS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Speed up gcc build #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/lang/gcc*}
OPTIONS_UNSET+=LTO_BOOTSTRAP
OPTIONS_UNSET_FORCE+=LTO_BOOTSTRAP
OPTIONS_UNSET_FORCE+=STANDARD_BOOTSTRAP
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# wine fails with ccache #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/emulators/wine}
WITH_CCACHE_BUILD=no
NO_CCACHE=yes
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Until ruby builds with v3.0 this fails for manpages #
# textproc/rubygem-asciidoctor for doc creation #
# Rust fails to build which prevents rust-svg stuff #
# #
# Been building my own fvwm3-dev was with SVG or not? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/x11-wm/fvwm3}
OPTIONS_UNSET+=SVG
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# force json-glib proper config for clutter dependency #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/json-glib}
OPTIONS_SET+=GIR
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Reverse tactic, special case this for slightly older #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/pylint}
DEFAULT_VERSIONS+=python=3.8
DEFAULT_VERSIONS+=python3=3.8
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# qbittorrent settings #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net-p2p/qbittorrent}
OPTIONS_SET+=PYTHON
OPTIONS_UNSET+=DBUS DEBUG
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# zziplib has trouble with sdl? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/zziplib}
OPTIONS_UNSET+=SDL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# libmad radio fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/libmad}
OPTIONS_UNSET+=SPEED
OPTIONS_SET+=ACCURACY
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# soundtouch - openmp incompatible at present #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/soundtouch}
OPTIONS_UNSET+=OPENMP
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# slurm-wlm - trouble with HDF5 #
# fails if hdf5 is enabled and was built with CXX #
# circular dependency if hdf5 uses PARALLEL instead #
# all other options build fine so are set. #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/sysutils/slurm-wlm}
OPTIONS_SET+=CURL DOCS GUI HWLOC IPMI MYSQL RRD
OPTIONS_UNSET+=HDF5
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# hdf5 circular dependency caused by PARALLEL option #
# radio button so should define both as appropriate #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/science/hdf5}
OPTIONS_SET+=CXX
OPTIONS_UNSET+=PARALLEL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# fontforge config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/print/fontforge}
OPTIONS_UNSET+=GTK3
OPTIONS_SET+=READLINE FREETYPE X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# freetype config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/print/freetype*}
OPTIONS_SET+=BROTLI
OPTIONS_UNSET+=DEBUG
OPTIONS_SET+=DOCS
OPTIONS_SET+=LONG_PCF_NAMES
OPTIONS_SET+=PNG
OPTIONS_SET+=TABLE_VALIDATION
OPTIONS_SET+=LCD_FILTERING
OPTIONS_UNSET+=LCD_RENDERING
OPTIONS_SET+=TT_SIZE_METRICS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# libcaca config #
# FTGL - Freetype font rendering in OpenGL #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/libcaca}
OPTIONS_SET+=DOCS FTGL IMLIB2 SLANG X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# libplacebo config #
# GLSLANG - since already SLANG above choose that here #
# If determined better otherwise, change both and all #
# same for ffmpeg #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/libplacebo}
OPTIONS_SET+=GLSLANG
OPTIONS_UNSET+=SHADERC
.endif
.if ${.CURDIR:M*/ports/multimedia/ffmpeg}
OPTIONS_SET+=GLSLANG
OPTIONS_UNSET+=SHADERC
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# mysql SASL for client not needed - connections local #
# also has had issues with cyrus-sasl2 #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/databases/mysql57-client}
OPTIONS_UNSET+=SASLCLIENT
.endif
.if ${.CURDIR:M*/ports/databases/mysql80-client}
OPTIONS_UNSET+=SASLCLIENT
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# sqlite better config -- luanti (minetest) uses this #
# Many options formalized here #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/databases/sqlite3}
OPTIONS_SET+=ARMOR DBPAGE DBSTAT DIRECT_READ DQS EXTENSION FTS3_TOKEN FTS4 FTS5 MEMMAN METADATA SECURE_DELETE \
STRIP TCL THREADS UNLOCK_NOTIFY URI
OPTIONS_UNSET+=EXAMPLES LIKENOTBLOB NORMALIZE NULL_TRIM RBU SORT_REF STATIC STMT TRUSTED_SCHEMA UNKNOWN_SQL \
UPDATE_LIMIT URI_AUTHORITY
#----
OPTIONS_SET+=JSON1
OPTIONS_UNSET+=SESSION
#----
#OPTIONS_SET+=# none set
OPTIONS_UNSET+=OFFSET SER1 SOUNDEX
#----
OPTIONS_SET+=RTREE
OPTIONS_UNSET+=GEOPOLY RTREE_INT
#----
OPTIONS_SET+=UNICODE61
OPTIONS_UNSET+=ICU
#----
OPTIONS_SET+=TS2
OPTIONS_UNSET+=TS0 TS1 TS3
#----
#OPTIONS_SET+=# none set
OPTIONS_UNSET+=STAT3 STAT4
#----
OPTIONS_SET+=LIBEDIT
OPTIONS_UNSET+=READLINE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# cockatrice -- mysql fails to build server needs too #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/cockatrice}
OPTIONS_UNSET+=MYSQL SERVEATRICE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# net-snmp config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net-mgmt/net-snmp}
OPTIONS_SET+=MFD_REWRITES TKMIB
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# ode adjustments #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/ode}
OPTIONS_UNSET+=GIMPACT OU
OPTIONS_SET+=DOUBLE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# exult radio conflict fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/exult}
OPTIONS_UNSET+=SDL1
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# heretic radio conflict fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/heretic}
OPTIONS_UNSET+=X11 SDL
OPTIONS_SET+=FASTX11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# uhexen2 radio conflict fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/uhexen2}
OPTIONS_UNSET+=MAD
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# instead radio conflict fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/instead}
OPTIONS_UNSET+=SDL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# espeak radio conflict fix #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/espeak}
OPTIONS_UNSET+=PORTAUDIO PULSEAUDIO
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# love luajit conflict #
# was partly solved or was I checking it was solved? #
#_______________________________________________________#
#.if ${.CURDIR:M*/ports/devel/love}
# OPTIONS_UNSET+=LUAJIT
#.endif
.if ${.CURDIR:M*/ports/devel/love10}
OPTIONS_UNSET+=LUAJIT
.endif
#.if ${.CURDIR:M*/ports/devel/love*}
# OPTIONS_UNSET+=LUAJIT
#.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# openoffice config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/editors/openoffice-4}
OPTIONS_UNSET+=MMEDIA GNOME GNOMEVFS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# casadi build option failure #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/casadi}
OPTIONS_UNSET+=CLANG
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# openblas build options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/openblas}
OPTIONS_SET+=AVX AVX2 AVX512 DYNAMIC_ARCH OPENMP
OPTIONS_UNSET+=INTERFACE64
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# suitesparse build options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/suitesparse-umfpack}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-amd}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-config}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-camd}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-colamd}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-ccolamd}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
.if ${.CURDIR:M*/ports/math/suitesparse-cholmod}
OPTIONS_UNSET+=ATLAS BLIS NETLIB
OPTIONS_SET+=OPENBLAS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# xorg-drivers configuration -- if scfb ticked #
# this causes scfb dependency and scfb being #
# available to load which prevents my AMD graphics #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/x11-drivers/xorg-drivers}
OPTIONS_SET+=AMDGPU ATI KEYBOARD LIBINPUT MOUSE
OPTIONS_UNSET+=NV SCFB VESA
OPTIONS_UNSET_FORCE+=NV SCFB VESA
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# If options MANPAGE set requires DOCS too #
# CPACK is experimental option right now. #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/cmake}
OPTIONS_UNSET=CPACK
OPTIONS_SET=DOCS MANPAGES
.endif
.if ${.CURDIR:M*/ports/devel/kf5-extra-cmake-modules}
OPTIONS_SET+=DOCS
.endif
.if ${.CURDIR:M*/ports/devel/ncurses}
OPTIONS_SET+=DOCS PROFILE
.endif
.if ${.CURDIR:M*/ports/graphics/waffle}
OPTIONS_SET+=DOCS
.endif
.if ${.CURDIR:M*/ports/devel/ocl-icd}
OPTIONS_SET+=DOCS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# add some capabilities, all non-defaults, and #
# test removing fortran option to see what breaks #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/coinmp}
OPTIONS_SET+=GLPK PARALLEL
OPTIONS_UNSET+=FORTRAN
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# gkrellm2 configuration -- needs client #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/sysutils/gkrellm2}
OPTIONS_UNSET+=DOCS NLS NTLM OPENSSL
OPTIONS_SET+=CLIENT
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# en-hunspell configuration #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/textproc/en-hunspell}
OPTIONS_SET+=CA_LARGE GB_IZE US_STANDARD
OPTIONS_UNSET+=CA_STANDARD GB_ISE GB_LARGE US_LARGE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# hplip configuration #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/print/hplip}
OPTIONS_SET+=SNMP X11
OPTIONS_UNSET+=FAX SCAN XSANE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# chromium-bsu fix radio options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/chromium-bsu}
OPTIONS_UNSET+=OPENAL
OPTIONS_SET+=SDL_MIXER
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# gdb fix radio options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/gdb}
OPTIONS_UNSET+=PORT_READLINE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# ffmpeg has a LOT of options, lets formalize them here #
# #
# SSH causes cascade py-cryptography dependency? #
# V4L (video for linux) is a problem #
# #
# disable encoders, unused features, dupes, and kitchensink #
#_______________________________________________________________#
.if ${.CURDIR:M*/ports/multimedia/ffmpeg}
# OPTIONS_SET+=AMR_NB AMR_WB ASM ASS BS2B CACA CDIO CELT CODEC2 DAV1D
# OPTIONS_SET+=DC1394 DOCS DRM FLITE FONTCONFIG FREETYPE FREIOR FRIBIDI
# OPTIONS_SET+=GLSLANG GME GSM ICONV ILBC KVAZAAR LADSPA LAME LENSFUN
# OPTIONS_SET+=LIBRSVG2 LIBXML2 LV2 LTO MFX MODPLUG MYSOFA OPENAL OPENGL
# OPTIONS_SET+=OPENMPT OPTIMIZED_CFLAGS OPUS RIST RTCPU RUBBERBAND SDL
# OPTIONS_SET+=SNAPPY SPEEX SRT TESSERACT THEORA TWOLAME VAAPI VDPAU
# OPTIONS_SET+=VIDSTAB VMAF VORBIS VPX VULKAN WEBP X264 X265 XCB XVID
# OPTIONS_SET+=XVIDEO ZIMG ZMQ ZVBI
OPTIONS_UNSET+=ALSA AOM DEBUG FDK_AAC JACK LIBBLURAY LV2 LTO
OPTIONS_UNSET+=OPENH264 OPENJPG POCKETSPHINX PULSEAUDIO RABBITMQ
OPTIONS_UNSET+=RAV1E SMB SHADERC SNDIO SOXR SSH SVTAV1 SVTHEVC SVTVP9
OPTIONS_UNSET+=V4L VAPOURSYNTH VO_AMRWBENC
#----
OPTIONS_SET+=GPL NONFREE
#----
OPTIONS_SET+=GMP
OPTIONS_UNSET+=GCRYPT LIBRTMP
#----
OPTIONS_UNSET+=GNUTLS MBEDTLS
OPTIONS_SET+=OPENSSL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# vlc adjustments to avoid dbus and other reasons #
# QT5 removed from global set options due to this port #
# SKINS implies QT5 so it must be disabled too #
# lua seems to have some sort of error #
#_______________________________________________________#
#.if ${.CURDIR:M*/ports/multimedia/vlc}
#multimedia_vlc_UNSET= QT5 SKINS DBUS AVAHI LUA
#multimedia_vlc_UNSET= SKINS DBUS AVAHI LUA
#OPTIONS_UNSET_FORCE= SKINS DBUS AVAHI LUA
#.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# vlc has a LOT of options, lets formalize them here #
# mostly identical to ffmpeg -- duplicated but added more #
# #
# SSH causes cascade py-cryptography dependency? #
# V4L (video for linux) is a problem #
# #
# disable encoders, unused features, dupes, and kitchensink #
# #
# MAD unset because cores, SHROEDINGER is obsoleted #
#_______________________________________________________________#
.if ${.CURDIR:M*/ports/multimedia/vlc}
OPTIONS_SET+=A52 AALIB AMR_NB AMR_WB ASM ASS BS2B CACA CDIO CELT CODEC2 DAV1D
OPTIONS_SET+=DC1394 DCA DOCS DRM DVDNAV DVDREAD FAAD FLAC FLITE FLUID
OPTIONS_SET+=FONTCONFIG FREETYPE FREIOR FRIBIDI
OPTIONS_SET+=GLSLANG GME GSM HARFBUZZ ICONV ILBC JPEG KATE KVAZAAR LADSPA
OPTIONS_SET+=LAME LENSFUN LIBPLACEBO LIBRSVG2 LIBXML2
OPTIONS_SET+=LV2 LTO MAD MFX MODPLUG MUSEPACK MYSOFA NCURSES
OPTIONS_SET+=NOTIFY OGG OPENAL OPENGL OPENMPT
OPTIONS_SET+=OPTIMIZED_CFLAGS OPUS PNG REALRTSP RIST RTCPU RUBBERBAND SDL
OPTIONS_SET+=SAMPLERATE SHOUTCAST SNAPPY SPEEX SRT
OPTIONS_SET+=TAGLIB TESSERACT THEORA TWOLAME
OPTIONS_SET+=VAAPI VCD VDPAU VIDSTAB VMAF VORBIS VPX VULKAN
OPTIONS_SET+=WAYLAND WEBP X264 X265 XCB XVID
OPTIONS_SET+=XVIDEO ZIMG ZMQ ZVBI
OPTIONS_UNSET+=ALSA AOM DEBUG FDK_AAC JACK LIBBLURAY LIBSSH2 LTO MAD
OPTIONS_UNSET+=OPENH264 OPENJPG POCKETSPHINX PULSEAUDIO QT5 RABBITMQ
OPTIONS_UNSET+=RAV1E SDL SCHROEDINGER SKINS SMB SNDIO SOXR SSH STREAM SVTAV1
OPTIONS_UNSET+=SVTHEVC SVTVP9 V4L VAPOURSYNTH VO_AMRWBENC
OPTIONS_SET+=GNUTLS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# openssh-portable config -- unset insecure option #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/security/openssh-portable}
OPTIONS_UNSET+=NONECIPHER
OPTIONS_UNSET_FORCE+=NONECIPHER
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# sundials add blas support #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/sundials}
OPTIONS_SET+=BLAS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# better maxima config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/math/maxima}
OPTIONS_SET+=DOCS EXAMPLES MANPAGES NOUSERINIT TEST XMAXIMA
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# bad option name -- remove samba #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/kdenetwork}
OPTIONS_UNSET+=FILESHARING
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# fix qt-multimedia radio selection #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/multimedia/qt*-multimedia}
OPTIONS_SET+=ALSA
OPTIONS_UNSET+=PULSEAUDIO
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# fix qt-webengine radio selection #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/multimedia/qt*-multimedia}
OPTIONS_SET+=ALSA
OPTIONS_UNSET+=PULSEAUDIO
OPTIONS_UNSET+=SNDIO
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# fix qtcurve radio selection #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/x11-themes/qtcurve}
OPTIONS_SET+=GTK2 KF5
OPTIONS_UNSET+=QT5
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# bad audio radio selections -- remove audio support #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/mail/faces}
OPTIONS_UNSET+=AUDIO NAS RPLAY SOX
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# fix pam conflict #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/security/sudo}
OPTIONS_UNSET+=PAM
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# add claws-mail docs #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/mail/claws-mail}
OPTIONS_SET+=DOCS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix pinentry #
# choose default -- unset other make.conf options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/security/pinentry}
OPTIONS_SET+=TTY
OPTIONS_UNSET+=NCURSES FLTK GTK2 QT5 GNOME3
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix neon #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/www/neon}
OPTIONS_SET+=EXPAT
OPTIONS_UNSET+=LIBXML
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix claws-mail-bogofilter #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/mail/claws-mail-bogofilter}
OPTIONS_SET+=SQLITE
OPTIONS_UNSET+=BDB TC
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# good zbar defaults #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/zbar}
OPTIONS_SET+=X11 V7
OPTIONS_UNSET+=GTK2 V4L V6
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# good py-pillow defaults #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/py-pillow}
# OPTIONS_SET+=X11 V7
OPTIONS_UNSET+=IMAGEQUANT
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix lua #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/lang/lua5*}
OPTIONS_UNSET+=LIBEDIT
.endif
.if ${.CURDIR:M*/ports/lang/lua54}
OPTIONS_UNSET+=LIBEDIT
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix wildmidi #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/wildmidi}
OPTIONS_SET+=OSS
OPTIONS_UNSET+=ALSA OPENAL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix glfw #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/glfw}
OPTIONS_SET+=WAYLAND
OPTIONS_UNSET+=X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio selector fix vkquake #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/vkquake}
OPTIONS_SET+=MIKMOD
OPTIONS_UNSET+=MODPLUG XMP
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# rubygem -- take advantage of clang? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/rubygem-multi_json}
OPTIONS_SET+=JSON
OPTIONS_UNSET+=JSON_PURE YAJL_RUBY
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# nss from mozilla purported faster and more featured than openSSL #
# https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/FAQ #
#_______________________________________________________________________#
.if ${.CURDIR:M*/ports/devel/apr}
OPTIONS_SET+=NSS
OPTIONS_UNSET+=SSL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# gimp help might be unique #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/gimp}
OPTIONS_SET+=HELP
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# openSSL here is uncertain -- purports speedier #
# http://anrieff.net/ucbench/technical_qna.html #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/archivers/libarchive}
OPTIONS_SET+=OPENSSL
OPTIONS_UNSET+=NETTLE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Cannot use libressl so second best is bundled. #
# except if openssl is used then is unset #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/www/node12}
OPTIONS_NSET+=BUNDLED_SSL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# radio button conflicts these ports for these options #
# mpg123 purported to be speedier if given the choice #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/sdl_mixer}
OPTIONS_SET+=MIKMOD
OPTIONS_UNSET+=MODPLUG
.endif
.if ${.CURDIR:M*/ports/audio/sdl2_mixer}
OPTIONS_SET+=MIKMOD MPG123
OPTIONS_UNSET+=MODPLUG MAD
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# some odd reason doc causes issues? Weird #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/sysutils/cdrtools}
OPTIONS_UNSET+=DOCS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Openoffice builds or pkg install; immediately cores. #
#_______________________________________________________#
#WITH_DEBUG_PORTS+=${PKGORIGIN}
WITH_DEBUG_PORTS+=editors/openoffice-devel
WITH_DEBUG_PORTS+=editors/openoffice-4
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# samba option fails build and hal not needed #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/gnome-vfs}
OPTIONS_UNSET+=HAL SAMBA
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# docs fails build, manpages=docs, and bash not needed #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/security/p11-kit}
OPTIONS_UNSET+=BASH
OPTIONS_UNSET+=DOCS
OPTIONS_UNSET+=MANPAGES
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# I do not use kerberos so none of them are needed #
# proper is to explicitly set GSSAPI_NONE #
# pkgs insist ftp/curl include GSSAPI_HEIMDAL #
#_______________________________________________________#
OPTIONS_UNSET+=KERBEROS HEIMDAL MIT HEIMDAL_BASE KERB_GSSAPI GSSAPI_BASE GSSAPI_MIT
OPTIONS_UNSET+=GSSAPI_HEIMDAL
OPTIONS_SET+=GSSAPI_NONE
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# dependents of curl need TLS_SRP for some things? #
# that option requires openssl or gnutls #
# choose gnutls but libssh2 option requires openssl #
# and TPM causes dependency loop due to gnutls #
# gnutls causes dependency on nettle which conflicts #
# with libressl-devel-libtls and tls-srp fails so then #
# NSS is compromise which works, solves conflicts. #
# #
# only supports TLS-SRP with either OpenSSL or GnuTLS #
# #
# libetpan needs something this config removes #
# which causes claws-mail to fail to build #
# #
# Decided to allow openssl and libssh2 #
# #
# threaded resolver doesn't work with luanti (minetest) #
# #
# poudriere requires static #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/ftp/curl}
OPTIONS_SET+=ALTSVC
OPTIONS_SET+=BROTLI
OPTIONS_SET+=CA_BUNDLE
OPTIONS_SET+=COOKIES
OPTIONS_UNSET+=CURL_DEBUG
OPTIONS_UNSET+=DEBUG
OPTIONS_SET+=DOCS
OPTIONS_SET+=EXAMPLES
OPTIONS_UNSET+=IDN
OPTIONS_SET+=IPV6
OPTIONS_SET+=NTLM
OPTIONS_SET+=PROXY
OPTIONS_SET+=PSL
OPTIONS_SET+=STATIC
OPTIONS_UNSET+=TLS_SRP
OPTIONS_SET+=ZSTD
OPTIONS_SET+=DICT
OPTIONS_SET+=FTP
OPTIONS_SET+=GOPHER
OPTIONS_SET+=HTTP
OPTIONS_SET+=HTTP2
OPTIONS_SET+=IMAP
OPTIONS_UNSET+=LDAP
OPTIONS_UNSET+=LDAPS
OPTIONS_UNSET+=LIBSSH
OPTIONS_SET+=LIBSSH2
OPTIONS_UNSET+=MQTT
OPTIONS_SET+=POP3
OPTIONS_UNSET+=RTMP
OPTIONS_SET+=RTSP
OPTIONS_UNSET+=SMB
OPTIONS_SET+=SMTP
OPTIONS_SET+=TELNET
OPTIONS_SET+=TFTP
OPTIONS_UNSET+=WEBSOCKET
OPTIONS_UNSET+=GSSAPI_BASE
OPTIONS_UNSET+=GSSAPI_HEIMDAL
OPTIONS_UNSET+=GSSAPI_MIT
OPTIONS_SET+=GSSAPI_NONE
OPTIONS_SET+=CARES
OPTIONS_UNSET+=THREADED_RESOLVER
OPTIONS_UNSET+=GNUTLS
OPTIONS_SET+=OPENSSL
OPTIONS_UNSET+=WOLFSSL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# pango has a THAI requirement or firefox throws a fit #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/ftp/curl}
OPTIONS_SET+=DOCS MANPAGES THAI X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# some things require gnutls built with P11KIT option #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/security/gnutls}
OPTIONS_UNSET+=TPM
OPTIONS_SET+=P11KIT
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# nettle via crypto? why does textproc need crypto? #
# gnutls calls in nettle #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/textproc/libxslt}
OPTIONS_UNSET+=CRYPTO
.endif
.if ${.CURDIR:M*/ports/devel/py-twisted}
OPTIONS_UNSET+=TLS
.endif
.if ${.CURDIR:M*/ports/archivers/libarchive}
OPTIONS_SET+=OPENSSL
OPTIONS_UNSET+=MBEDTLS NETTLE
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# some things cannot handle libressl #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/krdc}
OPTIONS_UNSET+=FREERDP
.endif
.if ${.CURDIR:M*/ports/net/remotebox}
OPTIONS_UNSET+=FREERDP
.endif
.if ${.CURDIR:M*/ports/net/remina-plugins}
OPTIONS_UNSET+=RDP
.endif
.if ${.CURDIR:M*/ports/net/guacamole-server}
OPTIONS_UNSET+=RDP
.endif
.if ${.CURDIR:M*/ports/net/vinagre}
OPTIONS_UNSET+=RDP
.endif
.if ${.CURDIR:M*/ports/www/node}
OPTIONS_UNSET+=BUNDLED_SSL
.endif
.if ${.CURDIR:M*/ports/devel/qca}
OPTIONS_SET+=OPENSSL
.endif
.if ${.CURDIR:M*/ports/dns/ldns}
OPTIONS_UNSET+=DANETAUSAGE GOST
OPTIONS_SET+=DRILL
.endif
.if ${.CURDIR:M*/ports/dns/unbound}
OPTIONS_UNSET+=ECDSA GOST EVAPI
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# npm -- node package manager, keep synced with node #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/www/npm}
OPTIONS_SET+=NODE
OPTIONS_UNSET+=NODE10 NODE12
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Maybe limit things with ATKONLY option? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/accessibility/at-spi2-core}
OPTIONS_SET+=ATKONLY
OPTIONS_SET+=X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# This adds samba support that I don't use #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/kdenetwork}
OPTIONS_UNSET+=FILESHARING
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# gtk3 adjustments but will it still ask for dbus? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/x11-toolkits/gtk30}
OPTIONS_UNSET+=ATK_BRIDGE CLOUDPRINT COLORD DEBUG
OPTIONS_SET+=BROADWAY CUPS WAYLAND X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# openal - avoiding dbus means no config utility #
# Warnings from this report "alsoft" self-identifier #
# qt5 requires dbus so we avoid qt5 too #
# sndio causes trouble for firefox audio #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/audio/openal-soft}
OPTIONS_UNSET+=CONFIG EXAMPLES JACK PORTAUDIO PULSEAUDIO SNDIO UTILS
OPTIONS_SET+=OSS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Try optimal firefox config #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/www/firefox}
OPTIONS_UNSET+=CANBERRA DBUS DEBUG OPTIMIZED_CFLAGS PROFILE LIBPROXY TEST ALSA JACK PULSEAUDIO SNDIO
OPTIONS_SET+=LTO FFMPEG
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# does firefox issue with libressl via libevent remain? #
# mysql needs libevent to have openssl #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/libevent}
# OPTIONS_UNSET+=OPENSSL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Minetest special adjustments test #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/games/minetest}
# OPTIONS_SET+=CURL DOCS EXAMPLES LUAJIT SOUND CLIENT SERVER FREETYPE
# OPTIONS_UNSET+=NCURSES NLS PGSQL LEVELDB REDIS SPATIAL
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# override defaults for llvm? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/llvm*}
OPTIONS_UNSET+=BE_FREEBSD BE_STANDARD
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# match rust-nightly #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/lang/rust}
OPTIONS_UNSET+=GDB
## maybe firefox needs webassembly?
OPTIONS_SET+=WASM
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# mDNSResponder vs Avahi choose Avahi #
# if mDNSResponder does not require dbus, revise #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/ntp-devel}
CONFLICTS+=avahi*
.endif
.if ${.CURDIR:M*/ports/audio/murmur}
CONFLICTS+=avahi*
.endif
.if ${.CURDIR:M*/ports/devel/android-tools-adb}
OPTIONS_UNSET+=MDNSRESPONDER
.endif
.if ${.CURDIR:M*/ports/audio/shairplay}
OPTIONS_UNSET+=MDNSRESPONDER
.endif
.if ${.CURDIR:M*/ports/audio/xmms2}
OPTIONS_UNSET+=MDNS_APPLE
OPTIONS_SET+=MDNS_AVAHI
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Fix circular dependency loops #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/net/avahi}
OPTIONS_UNSET+=GTK
.endif
.if ${.CURDIR:M*/ports/print/cups}
OPTIONS_UNSET+=AVAHI GNUTLS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# remove dbus from cups #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/print/cups}
OPTIONS_UNSET+=DBUS
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# ImageMagick6 vs 7 conflict -- most use V6 #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/zbar}
OPTIONS_UNSET+=V7
OPTIONS_SET+=V6
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# damned wayland additions #
# some cause problems? Looks like I changed my mind? #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/mesa-dri}
# OPTIONS_UNSET+=WAYLAND
OPTIONS_SET+=WAYLAND
.endif
.if ${.CURDIR:M*/ports/graphics/mesa-libs}
# OPTIONS_UNSET+=WAYLAND
OPTIONS_SET+=WAYLAND
.endif
.if ${.CURDIR:M*/ports/devel/sdl20}
# OPTIONS_UNSET+=VIDEO_WAYLAND
OPTIONS_SET+=VIDEO_WAYLAND
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# sdl2 options settings #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/devel/sdl20}
OPTIONS_UNSET+=CSD DBUS FCITX HIDAPI IBUS JOYSTICK \
ALSA JACK NAS PIPEWIRE PULSEAUDIO SNDIO
OPTIONS_SET+=SAMPLERATE UDEV \
OSS \
KMSDRM OPENGL OPENGLES VULCAN X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# libglvnd must have X11 set for cairo #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/libglvnd}
OPTIONS_SET+=X11
OPTIONS_SET_FORCE=X11
.endif
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# ImageMagick7 - explicitly set options #
#_______________________________________________________#
.if ${.CURDIR:M*/ports/graphics/ImageMagick7}
OPTIONS_UNSET+=FPX GRAPHVIZ GSLIB
OPTIONS_SET+=16BIT_PIXEL BZIP2 DJVU DOCS FFMPEG FFTW FLIF FONTCONFIG FREETYPE HDRI HEIF JBIG JPEG
OPTIONS_SET+=JXL LCMS2 LQR LZMA MODULES OPENEXR OPENMP PANGO PDF PERL PNG RAQM RAW SVG THREADS
OPTIONS_SET+=TIFF WEBP WMF
.endif
# ---------------------------------------------< End user additions and modifications >--------------------------------------------- #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Automatically added portconf section -- DON'T TOUCH #
#_______________________________________________________#
No comments:
Post a Comment
Thank you for your interest!