Not long ago I discovered that the enlightenment desktop does in fact have a considerably more current version available. I have been using FVWM, I did use enlightenment in the distant past and some years ago, but had to quit due to some flakiness. I believe it is still BSD licensed and as such this gives it a bit more prestige for me. I have been using poudriere for a while now and have even corrected some flaws in a number of ports through its built-in testing scrutiny leading to modifying various things (such as, most often, the Makefile) for them directly in the poudriere jail path for the port. If I were to attempt to get the newer enlightenment to build for either an updated or fresh port, I should attempt this in a clean and unmodified jail. Poudriere provides purpose-built jails and includes the tools needed to be much more certain that any port would succeed.
My first step, creating a new poudriere jail, I nearly committed but stopped very shortly after since I am sure it would have created, once more, a newer system than the host.
poudriere jail -c -v stable/12 -a amd64 -j 12amd64_porting -m svn+https
I looked at the section of the manpage (man 8 poudriere-jail) describing many ways I could create the install, but decided that perhaps I can simply do a recursive copy of one jail directory which I already have, to a new name in the jail path. This is likely an over-simplification of what truly needs to be done, now that I take a few moments to think about it. The trouble is, these options below hint at what I'd like to do but are not explicit enough. I tried the crazy hackish method because I am not sure that using the path to the jail I already have would result in what I desire. I will have to try it anyway, and was thinking I'd use the url method until I looked closer at the options. Look at the src=PATH with -b option, this should let me use the host src directory which is real interesting.
SUBCOMMANDS
-c Creates a jail. See CAVEATS for restrictions on the names
of jails.
-d Deletes a jail.
If the stdin is a TTY then the command is going to ask for
confirmation, which defaults to “N” (for “no”). Othwerwise,
the specified jail is deleted without confirmation.
-i Show information about a jail. See also
poudriere-status(8).
-l List all poudriere jails.
-n When combined with -l, only display jail name.
-s Starts a jail.
-k Kills a jail (stops it).
-r name Rename a jail to name.
-u Update a jail.
OPTIONS
Except for -l, all of the subcommands require the -j option (see below).
-b Build the source provided with the -m src=PATH option.
-J number The number of make jobs will run in parallel for buildworld.
Defaults to the number of CPUs reported by: sysctl hw.ncpu.
-q Remove the header when -l is the specified mandatory option.
Otherwise, it has no effect.
-j name Specifies the name of the jail.
-v version Specifies which version of FreeBSD to use in the jail. If
you are using method ftp then the version should in the form
of: 9.0-RELEASE. If you are using method of svn then the
version should be in the form of git or svn branches:
stable/9 or head for CURRENT. Other methods only use the
value for display.
-a architecture
Specifies which architecture of FreeBSD to use in the jail.
(Default: same as host)
-m method Specifies which method to use to create the jail. (default:
http)
Pre-built distribution options:
allbsd Use http://www.allbsd.org.
ftp http Fetch from configured FREEBSD_HOST variable
from poudriere.conf.
ftp-archive Fetch from http://ftp-archive.freebsd.org.
null This option can be used to import an existing
directory that already contains an installed
system. The path must be specified with -M
path. It is expected that this directory be
installed to with the following:
/usr/src# make installworld DESTDIR=PATH DB_FROM_SRC=1
/usr/src# make distrib-dirs DESTDIR=PATH DB_FROM_SRC=1
/usr/src# make distribution DESTDIR=PATH DB_FROM_SRC=1
It will not be copied at the time of running
jail. Deleting the jail will attempt to
revert any files changed by poudriere.
src=PATH Install from the given src directory at PATH.
This directory will not be built from. It is
expected that it is already built and maps to
a corresponding /usr/obj directory.
tar=PATH Install from the tarball at the given PATH.
Note that this method requires the tarball
contains the /usr/src files as well if you
plan to build any port containing modules.
url=PATH Fetch from given PATH. Any URL supported by
fetch(1) can be used. For example:
url=file:///mirror/10.0
Build from source options:
git git+http git+https git+ssh
Will use git, the -v flag to set the branch
name and the GIT_BASEURL variable in
poudriere.conf.
src=PATH With the -b flag, the src tree will be copied
into the jail and built.
svn svn+file svn+http svn+https
Will use SVN and the SVN_HOST variable in
poudriere.conf.
So that means that after I have used make clean cleanworld in /usr/src to be sure it is not going to have any remnants, I will invoke the following:
The manpage mentions that the -v part would then only be for display due to obtaining it another way. Of course this is all possible because I plan to build and use ports from poudriere on the same system. I blindly used the -a amd64 but this could be left off as the default is to match the host. This method, of using the host source for the jail will also avoid the issue of the jail ever being more current than the host at creation. This will be especially helpful if I can also use the -u update with the -m method specifying as I do above, to use the host source sometime after I update the host itself. The manpage suggests and implies this, but I won't know for certain until the day I test it. The copying, whether by my hackish attempt which I aborted and cleaned up, or by poudriere itself with the above command, is rather slow but eventually builds.
root@ichigo:~ # poudriere jail -c -v stable/12 -a amd64 -j 12amd64_porting -b -m src=/usr/src
[00:00:00] Creating 12amd64_porting fs at /usr/local/poudriere/jails/12amd64_porting... done
[00:00:00] Copying /usr/src to /usr/local/poudriere/jails/12amd64_porting/usr/src... done
[00:09:16] Starting make buildworld with 4 jobs
[Creating objdir /usr/obj/usr/local/poudriere/jails/12amd64_porting/usr/src/amd64.amd64...]
--- buildworld ---
make[1]: "/usr/local/poudriere/jails/12amd64_porting/usr/src/Makefile.inc1" line 342: SYSTEM_COMPILER: Determined that CC=/usr/local/bin/ccache cc matches the source tree. Not bootstrapping a cross-compiler.
make[1]: "/usr/local/poudriere/jails/12amd64_porting/usr/src/Makefile.inc1" line 347: SYSTEM_LINKER: Determined that LD=ld matches the source tree. Not bootstrapping a cross-linker.
--- buildworld_prologue ---
--------------------------------------------------------------
>>> World build started on Wed Oct 28 02:19:26 CDT 2020
As you might see, since my poudriere.conf has settings for only 4 poudriere port building jobs, there are only 4 jobs for the world build. This is something to make note about because I actually have a 6-core cpu that would speed this up considerably if I temporarily set that at 6 jobs. The other option is specifically mentioned by the manpage, to set this by way of -J 6 which controls the number of jobs for buildworld, while it says the default is the number of cores, this is only default if settings in your poudriere.conf do not override it like mine does. There is a lot of output as anyone who has watched much of a world or kernel build would know. The end of the preparation of the jail looks like this:
--- installconfig_subdir_usr.sbin/wpa/wpa_supplicant --- ===> usr.sbin/wpa/wpa_supplicant (installconfig) --- installconfig_subdir_usr.sbin/wpa/wpa_cli --- ===> usr.sbin/wpa/wpa_cli (installconfig) --- installconfig_subdir_usr.sbin/wpa/wpa_passphrase --- ===> usr.sbin/wpa/wpa_passphrase (installconfig) --- installconfig_subdir_usr.sbin/wpa/hostapd --- ===> usr.sbin/wpa/hostapd (installconfig) --- installconfig_subdir_usr.sbin/wpa/hostapd_cli --- ===> usr.sbin/wpa/hostapd_cli (installconfig) --- installconfig_subdir_usr.sbin/wpa/ndis_events --- ===> usr.sbin/wpa/ndis_events (installconfig) awk: can't open file /sys/param.h source line number 1 [03:06:26] Recording filesystem state for clean... done [03:06:27] Jail 12amd64_porting 12.2-STABLE 1202502 amd64 is ready to be used root@ichigo:~ #
Did you notice the flaw in my plan? I never said anything about a completely separate ports tree, so this might be something I would need to create. I should also look into whether I can somehow temporarily include my added ports tree directories (turns out I may need to update efl as well) using some special poudriere option. There are a number of things which are controlled by additional config files for poudriere which I have not looked at yet.
CUSTOMISATION
For bulk building, you can customize binary packages produced by
poudriere by changing build options port by port, and you can also
specify building directives in a make.conf file.
Custom build options
Before building a package, poudriere can mount a directory containing
option files if available. poudriere will check for any of these
directories in this order:
/usr/local/etc/poudriere.d/<jailname>-<tree>-<setname>-options
/usr/local/etc/poudriere.d/<jailname>-<setname>-options
/usr/local/etc/poudriere.d/<jailname>-<tree>-options
/usr/local/etc/poudriere.d/<tree>-<setname>-options
/usr/local/etc/poudriere.d/<setname>-options
/usr/local/etc/poudriere.d/<tree>-options
/usr/local/etc/poudriere.d/<jailname>-options
/usr/local/etc/poudriere.d/options
If a directory with this name exists, it is null-mounted into the
/var/db/ports/ directory of the jail, thus allowing to build package with
custom OPTIONS.
The options subcommand can be used to easily configure options in the
correct directory.
This directory has the usual layout for options: it contains one
directory per port (the name of the port) containing an 'options' file
with lines similar to:
WITH_FOO=true
WITHOUT_BAR=true
As a starter, you may want to copy an existing /var/db/ports/ to
/usr/local/etc/poudriere.d/options.
Blacklist ports
You can also specify a blacklist which will disallow the lists port
origins from building on the matched jail. Any of the following are
allowed and will all be used in the order shown:
/usr/local/etc/poudriere.d/blacklist
/usr/local/etc/poudriere.d/<setname>-blacklist
/usr/local/etc/poudriere.d/<tree>-blacklist
/usr/local/etc/poudriere.d/<jailname>-blacklist
/usr/local/etc/poudriere.d/<tree>-<setname>-blacklist
/usr/local/etc/poudriere.d/<jailname>-<tree>-blacklist
/usr/local/etc/poudriere.d/<jailname>-<setname>-blacklist
/usr/local/etc/poudriere.d/<jailname>-<tree>-<setname>-blacklist
If QEMU is being used then a special qemu blacklist is also loaded.
/usr/local/etc/poudriere.d/qemu-blacklist
Create optional poudriere.conf
You can also specify an optional poudriere.conf that is pulled in
depending on the build. Any of the following are allowed and will all be
used in the order shown:
/usr/local/etc/poudriere.d/poudriere.conf
/usr/local/etc/poudriere.d/<setname>-poudriere.conf
/usr/local/etc/poudriere.d/<tree>-poudriere.conf
/usr/local/etc/poudriere.d/<jailname>-poudriere.conf
/usr/local/etc/poudriere.d/<tree>-<setname>-poudriere.conf
/usr/local/etc/poudriere.d/<jailname>-<tree>-poudriere.conf
/usr/local/etc/poudriere.d/<jailname>-<setname>-poudriere.conf
/usr/local/etc/poudriere.d/<jailname>-<tree>-<setname>-poudriere.conf
Create optional make.conf
You can also specify a global make.conf which will be used for all the
jails. Any of the following are allowed and will all be used in the
order shown:
/usr/local/etc/poudriere.d/make.conf
/usr/local/etc/poudriere.d/<setname>-make.conf
/usr/local/etc/poudriere.d/<tree>-make.conf
/usr/local/etc/poudriere.d/<jailname>-make.conf
/usr/local/etc/poudriere.d/<tree>-<setname>-make.conf
/usr/local/etc/poudriere.d/<jailname>-<tree>-make.conf
/usr/local/etc/poudriere.d/<jailname>-<setname>-make.conf
/usr/local/etc/poudriere.d/<jailname>-<tree>-<setname>-make.conf
/usr/local/etc/poudriere.d/hooks/plugins/<plugin>/make.conf
Create optional src.conf
You can also specify a global src.conf which will be used for building
jails with the jail -c subcommand. Any of the following are allowed and
will all be used in the order shown:
/usr/local/etc/poudriere.d/src.conf
/usr/local/etc/poudriere.d/<setname>-src.conf
/usr/local/etc/poudriere.d/<jailname>-src.conf
Create optional src-env.conf
You can also specify a global src-env.conf which will be used for
building jails with the jail -c subcommand. Any of the following are
allowed and will all be used in the order shown:
/usr/local/etc/poudriere.d/src-env.conf
/usr/local/etc/poudriere.d/<setname>-src-env.conf
/usr/local/etc/poudriere.d/<jailname>-src-env.conf
Hooks
Hook scripts may be loaded in any of the following paths:
/usr/local/etc/poudriere.d/hooks/<hook>.sh
/usr/local/etc/poudriere.d/hooks/plugins/<plugin>/<hook>.sh
Of the above customization options listed, I will certainly need to avoid my custom make.conf, simply to be certain that defaults are used in the build and not to cause things to be more convoluted. I am using the same /var/ports/db by way of a symbolic link, so that would need to be set differently in another poudriere.conf file. Since I am making things complicated now, it may be a good idea to look over how I setup poudriere for my local ports building and see how I would replace the symbolic links with less hackish methods (defined by specific poudriere config files). The other options available that are mentioned above, I don't think I will need, such as blacklist, src.conf, src-env.conf, or hooks. The hooks option is intriguing since it sounds like a method to extend poudriere with custom scripts, though at the moment I am unsure what those could be, what I would need or might someday design, but glad the option exists.
Hmm. It appears that enlightenment is fairly up-to-date and efl too, probably. I may have to be sure to install them all properly and test a bit to see if it still has the same bugs or if i somehow mixed multiple versions and that caused my troubles. This means that I will probably not be working on enlightenment as I had first intended but might need to dig up some other port to work at getting to function properly on FreeBSD, maybe a game? I tried to get devel/efl built, and x11-wm/enlightenment built, but it seems that although they are technically more up-to-date, they are failing builds. I will be investigating them afterall, and have begun with efl which does need an update beyond what is in ports.
The attempt fails unexpectedly with configure, though most things leading up to that step appear to succeed. I used the command below on my usual jail as such testing would clean up most things anyway. My only modification to the efl Makefile so far is to adjust the version number, and comment out the 'broken' flag. The commandline options I added are for verbose and not to kill the process at a failure, so between the two I should find all failures and have enough detail to figure it out.
Unfortunately, even with all of the detail, it doesn't seem to point at anything obvious, each dependency is sought, built as needed, satisfied, and it continues to the next. The next step after all of the various dependencies are verified, is for efl to use its build method which looks to be meson. I accidentally killed the terminal which had the poudriere output, so even if there were other things to add, or even look at more closely, those are in /dev/null. I have re-started the same poudriere testport for devel/efl but added an option to keep the work directory after it completes. This may also contain other logs which I did not yet find. The tail of the output mentions the meson build log and the error which caused the failure.
Run-time dependency libavif found: NO (tried pkgconfig) src/lib/evas/meson.build:13:0: ERROR: Dependency "libavif" not found, tried pkgconfig A full log can be found at /wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/meson-logs/meson-log.txt ===> Script "configure" failed unexpectedly.
I am not sure what it means when it says "tried pkgconfig" with regard to FreeBSD, perhaps it is a Linux thing or maybe it used pkg to check whether that port was installed. Either way, it looks like I will need to scrutinize the devel/efl Makefile to see whether libavif is missing or whether adding it as a runtime dependency will solve this issue. As for the work directory saving, the option I added:
-w Save WRKDIR on build failure. The WRKDIR will be tarred up
into ${POUDRIERE_DATA}/wrkdirs.
The makefile for devel/efl did not include "libavif.so:graphics/libavif" in its Run-time dependencies, so I added it. This is very strange as other times I used poudriere testport it successfully detected missing dependencies, it listed those that were detected as necessary, it checked whether dependencies were set properly. I am not sure if I possibly missed some sort of option or if poudriere changed or if perhaps this specific port does things just a bit oddly due to the meson build system. Regardless, the error message fairly clearly indicated what I needed to do and have done now, so I need to wait for results to see if that solved the build failure. After that attempt, the same error was reported so maybe the dependency line needs to be with the libraries. I doubt that moving it will solve the problem for the simple fact that graphics/libavif was the first thing built due to it being a dependency in the FreeBSD port Makefile and yet the error, failure remained. I was wrong, moving the dependency to the libraries solved the error above but only until the build failed with a new error:
ninja: build stopped: subcommand failed. ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop. make: stopped in /usr/ports/devel/efl [00:15:33] Saved devel/efl | efl-1.25.1 wrkdir to: /usr/local/poudriere/data/wrkdirs/12amd64-default/default/efl-1.25.1.tbz build of devel/efl | efl-1.25.1 ended at Wed Nov 25 07:06:56 CST 2020 build time: 00:17:34 !!! build failure encountered !!! [00:18:27] Error: Build failed in phase: build [00:18:27] Cleaning up 12amd64-default: removed 12amd64-default-n: removed [00:18:27] Unmounting file systems
My next step is to see if any configuration options for devel/efl relate or cause the error to manifest, or if possibly newer versions of any of the dependencies would solve it. This is the sort of work that occurs with porting anything, although it tends to be from scratch and not begun from the prior version. Another possible area to investigate is whether any patches might have caused any unforseen issues. I can test whether permitting it to fail sooner might help identify an earlier error which leads to the last one. I think this is what I will do first, then check versions of dependencies, and finally look at the configuration. Progress can be slow but attacking it slowly also makes succeeding a bit more likely, so work step by step and keep notes.
I see the errors below which seem to be an API issue possibly due to the wrong version or some other flaw I likely cannot fix myself.
/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/avif/evas_image_load_avif.c:68:36: error: too many arguments to function call, expected single argument 'decoder', have 2 arguments
res = avifDecoderParse(decoder, &raw);
~~~~~~~~~~~~~~~~ ^~~~
/usr/local/include/avif/avif.h:722:1: note: 'avifDecoderParse' declared here
avifResult avifDecoderParse(avifDecoder * decoder);
^
/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/avif/evas_image_load_avif.c:155:41: error: too many arguments to function call, expected single argument 'decoder', have 2 arguments
res = avifDecoderParse(decoder, &raw);
~~~~~~~~~~~~~~~~ ^~~~
/usr/local/include/avif/avif.h:722:1: note: 'avifDecoderParse' declared here
avifResult avifDecoderParse(avifDecoder * decoder);
^
2 errors generated.
A short time later, the last build command is this which mentions 'loader' and 'psd' a number of times, which I cannot say exactly why it causes a failure.
[2610/4621] cc -Isrc/modules/evas/image_loaders/libshared_loader_psd.so.p -Isrc/modules/evas/image_loaders -I../src/modules/evas/image_loaders -I. -I.. -Isrc/lib/evil -I../src/lib/evil -Isrc/lib/eina -I../src/lib/eina -Isrc/lib/eo -I../src/lib/eo -Isrc/lib/efl -I../src/lib/efl -Isrc/lib/emile -I../src/lib/emile -Isrc/lib/eet -I../src/lib/eet -Isrc/lib/ecore -I../src/lib/ecore -Isrc/lib/eldbus -I../src/lib/eldbus -Isrc/lib/ecore_audio -I../src/lib/ecore_audio -Isrc/lib/ecore_con -I../src/lib/ecore_con -Isrc/lib/ecore_file -I../src/lib/ecore_file -Isrc/lib/ecore_input -I../src/lib/ecore_input -Isrc/lib/ecore_x -I../src/lib/ecore_x -Isrc/lib/ecore_wl2 -I../src/lib/ecore_wl2 -Isrc/lib/ecore_sdl -I../src/lib/ecore_sdl -Isrc/lib/ecore_win32 -I../src/lib/ecore_win32 -Isrc/lib/ecore_ipc -I../src/lib/ecore_ipc -Isrc/lib/ector -I../src/lib/ector -Isrc/lib/evas/software_generic -I../src/lib/evas/software_generic -I../src/modules/evas/engines/software_generic/filters -Isrc/lib/evas -I../src/lib/evas -Isrc/lib/evas/common -I../src/lib/evas/common -Isrc/lib/evas/include -I../src/lib/evas/include -Isrc/lib/evas/filters -I../src/lib/evas/filters -Isrc/lib/evas/canvas -I../src/lib/evas/canvas -Isrc/lib/efreet -I../src/lib/efreet -Isrc/lib/ecore_input_evas -I../src/lib/ecore_input_evas -Isrc/modules/evas/engines/buffer -I../src/modules/evas/engines/buffer -Isrc/lib/ecore_evas -I../src/lib/ecore_evas -Isrc/lib/ecore_imf -I../src/lib/ecore_imf -Isrc/lib/embryo -I../src/lib/embryo -Isrc/lib/eio -I../src/lib/eio -Isrc/lib/ecore_imf_evas -I../src/lib/ecore_imf_evas -Isrc/lib/ephysics -I../src/lib/ephysics -Isrc/lib/edje -I../src/lib/edje -Isrc/lib/emotion -I../src/lib/emotion -Isrc/lib/ethumb -I../src/lib/ethumb -Isrc/lib/ethumb_client -I../src/lib/ethumb_client -Isrc/lib/elementary -I../src/lib/elementary -Isrc/lib/efl_canvas_wl -I../src/lib/efl_canvas_wl -Isrc/static_libs/buildsystem -I../src/static_libs/buildsystem -Isrc/lib -I../src/lib -Isrc/static_libs/libunibreak -I../src/static_libs/libunibreak -Isrc/wayland_protocol -I../src/wayland_protocol -Isrc/lib/efl/interfaces -Isrc/lib/ector/gl -Isrc/lib/ector/software -Isrc/lib/evas/gesture -I/usr/local/include/luajit-2.0 -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/libepoll-shim -Xclang -fcolor-diagnostics -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -O3 -fvisibility=hidden -Wall -Wpointer-arith -Wunused-parameter -Wsign-compare -Wno-missing-field-initializers -DHAVE_CONFIG_H=1 -D_GNU_SOURCE=1 -DEFL_BETA_API_SUPPORT=1 -DELM_INTERNAL_API_ARGESFSDFEFC=1 -O2 -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -fPIC -pthread '-DPACKAGE_DATA_DIR="/usr/local/share/evas"' -DNEED_RUN_IN_TREE=1 -DEFL_BUILD=1 -MD -MQ src/modules/evas/image_loaders/libshared_loader_psd.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_psd_evas_image_load_psd.c.o -MF src/modules/evas/image_loaders/libshared_loader_psd.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_psd_evas_image_load_psd.c.o.d -o src/modules/evas/image_loaders/libshared_loader_psd.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_psd_evas_image_load_psd.c.o -c /wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/psd/evas_image_load_psd.c ninja: build stopped: subcommand failed. ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop.
What I am taking from those, is the mention of 'raw' and 'psd' which are mentioned in the efl configuration options in the 'loader' section, RAW and PS. So my next testbuild will have those two configuration options unticked and see what we get next. Between those two seems to be the issue which is a fatal error but whether attempting to avoid them by a configuration change will solve it or if it might be solved by different versions of the dependencies I cannot say. The main thing is successfully building to the end, solving the various problems will be second to that.
[2809/4617] cc -Isrc/modules/evas/image_loaders/libshared_loader_tgv.so.p -Isrc/modules/evas/image_loaders -I../src/modules/evas/image_loaders -I. -I.. -Isrc/lib/evil -I../src/lib/evil -Isrc/lib/eina -I../src/lib/eina -Isrc/lib/eo -I../src/lib/eo -Isrc/lib/efl -I../src/lib/efl -Isrc/lib/emile -I../src/lib/emile -Isrc/lib/eet -I../src/lib/eet -Isrc/lib/ecore -I../src/lib/ecore -Isrc/lib/eldbus -I../src/lib/eldbus -Isrc/lib/ecore_audio -I../src/lib/ecore_audio -Isrc/lib/ecore_con -I../src/lib/ecore_con -Isrc/lib/ecore_file -I../src/lib/ecore_file -Isrc/lib/ecore_input -I../src/lib/ecore_input -Isrc/lib/ecore_x -I../src/lib/ecore_x -Isrc/lib/ecore_wl2 -I../src/lib/ecore_wl2 -Isrc/lib/ecore_sdl -I../src/lib/ecore_sdl -Isrc/lib/ecore_win32 -I../src/lib/ecore_win32 -Isrc/lib/ecore_ipc -I../src/lib/ecore_ipc -Isrc/lib/ector -I../src/lib/ector -Isrc/lib/evas/software_generic -I../src/lib/evas/software_generic -I../src/modules/evas/engines/software_generic/filters -Isrc/lib/evas -I../src/lib/evas -Isrc/lib/evas/common -I../src/lib/evas/common -Isrc/lib/evas/include -I../src/lib/evas/include -Isrc/lib/evas/filters -I../src/lib/evas/filters -Isrc/lib/evas/canvas -I../src/lib/evas/canvas -Isrc/lib/efreet -I../src/lib/efreet -Isrc/lib/ecore_input_evas -I../src/lib/ecore_input_evas -Isrc/modules/evas/engines/buffer -I../src/modules/evas/engines/buffer -Isrc/lib/ecore_evas -I../src/lib/ecore_evas -Isrc/lib/ecore_imf -I../src/lib/ecore_imf -Isrc/lib/embryo -I../src/lib/embryo -Isrc/lib/eio -I../src/lib/eio -Isrc/lib/ecore_imf_evas -I../src/lib/ecore_imf_evas -Isrc/lib/ephysics -I../src/lib/ephysics -Isrc/lib/edje -I../src/lib/edje -Isrc/lib/emotion -I../src/lib/emotion -Isrc/lib/ethumb -I../src/lib/ethumb -Isrc/lib/ethumb_client -I../src/lib/ethumb_client -Isrc/lib/elementary -I../src/lib/elementary -Isrc/lib/efl_canvas_wl -I../src/lib/efl_canvas_wl -Isrc/static_libs/buildsystem -I../src/static_libs/buildsystem -Isrc/lib -I../src/lib -Isrc/static_libs/libunibreak -I../src/static_libs/libunibreak -Isrc/wayland_protocol -I../src/wayland_protocol -Isrc/static_libs/rg_etc -I../src/static_libs/rg_etc -Isrc/static_libs/lz4 -I../src/static_libs/lz4 -Isrc/lib/efl/interfaces -Isrc/lib/ector/gl -Isrc/lib/ector/software -Isrc/lib/evas/gesture -I/usr/local/include/luajit-2.0 -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/libepoll-shim -Xclang -fcolor-diagnostics -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -O3 -fvisibility=hidden -Wall -Wpointer-arith -Wunused-parameter -Wsign-compare -Wno-missing-field-initializers -DHAVE_CONFIG_H=1 -D_GNU_SOURCE=1 -DEFL_BETA_API_SUPPORT=1 -DELM_INTERNAL_API_ARGESFSDFEFC=1 -O2 -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -fPIC -pthread '-DPACKAGE_DATA_DIR="/usr/local/share/evas"' -DNEED_RUN_IN_TREE=1 -DEFL_BUILD=1 -MD -MQ src/modules/evas/image_loaders/libshared_loader_tgv.so.p/.._.._.._static_libs_rg_etc_rg_etc1.c.o -MF src/modules/evas/image_loaders/libshared_loader_tgv.so.p/.._.._.._static_libs_rg_etc_rg_etc1.c.o.d -o src/modules/evas/image_loaders/libshared_loader_tgv.so.p/.._.._.._static_libs_rg_etc_rg_etc1.c.o -c ../src/static_libs/rg_etc/rg_etc1.c ninja: build stopped: subcommand failed. ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop.
I don't know what tgv could be, there is nothing in the configuration which is similar to that. I think I will untick all of the items in the loader section and see whether we can get past this section of errors.
FAILED: src/modules/evas/image_loaders/libshared_loader_avif.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_avif_evas_image_load_avif.c.o
cc -Isrc/modules/evas/image_loaders/libshared_loader_avif.so.p -Isrc/modules/evas/image_loaders -I../src/modules/evas/image_loaders -I. -I.. -Isrc/lib/evil -I../src/lib/evil -Isrc/lib/eina -I../src/lib/eina -Isrc/lib/eo -I../src/lib/eo -Isrc/lib/efl -I../src/lib/efl -Isrc/lib/emile -I../src/lib/emile -Isrc/lib/eet -I../src/lib/eet -Isrc/lib/ecore -I../src/lib/ecore -Isrc/lib/eldbus -I../src/lib/eldbus -Isrc/lib/ecore_audio -I../src/lib/ecore_audio -Isrc/lib/ecore_con -I../src/lib/ecore_con -Isrc/lib/ecore_file -I../src/lib/ecore_file -Isrc/lib/ecore_input -I../src/lib/ecore_input -Isrc/lib/ecore_x -I../src/lib/ecore_x -Isrc/lib/ecore_wl2 -I../src/lib/ecore_wl2 -Isrc/lib/ecore_sdl -I../src/lib/ecore_sdl -Isrc/lib/ecore_win32 -I../src/lib/ecore_win32 -Isrc/lib/ecore_ipc -I../src/lib/ecore_ipc -Isrc/lib/ector -I../src/lib/ector -Isrc/lib/evas/software_generic -I../src/lib/evas/software_generic -I../src/modules/evas/engines/software_generic/filters -Isrc/lib/evas -I../src/lib/evas -Isrc/lib/evas/common -I../src/lib/evas/common -Isrc/lib/evas/include -I../src/lib/evas/include -Isrc/lib/evas/filters -I../src/lib/evas/filters -Isrc/lib/evas/canvas -I../src/lib/evas/canvas -Isrc/lib/efreet -I../src/lib/efreet -Isrc/lib/ecore_input_evas -I../src/lib/ecore_input_evas -Isrc/modules/evas/engines/buffer -I../src/modules/evas/engines/buffer -Isrc/lib/ecore_evas -I../src/lib/ecore_evas -Isrc/lib/ecore_imf -I../src/lib/ecore_imf -Isrc/lib/embryo -I../src/lib/embryo -Isrc/lib/eio -I../src/lib/eio -Isrc/lib/ecore_imf_evas -I../src/lib/ecore_imf_evas -Isrc/lib/ephysics -I../src/lib/ephysics -Isrc/lib/edje -I../src/lib/edje -Isrc/lib/emotion -I../src/lib/emotion -Isrc/lib/ethumb -I../src/lib/ethumb -Isrc/lib/ethumb_client -I../src/lib/ethumb_client -Isrc/lib/elementary -I../src/lib/elementary -Isrc/lib/efl_canvas_wl -I../src/lib/efl_canvas_wl -Isrc/static_libs/buildsystem -I../src/static_libs/buildsystem -Isrc/lib -I../src/lib -Isrc/static_libs/libunibreak -I../src/static_libs/libunibreak -Isrc/wayland_protocol -I../src/wayland_protocol -Isrc/lib/efl/interfaces -Isrc/lib/ector/gl -Isrc/lib/ector/software -Isrc/lib/evas/gesture -I/usr/local/include/luajit-2.0 -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -I/usr/local/include/fribidi -I/usr/local/include/harfbuzz -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/libepoll-shim -Xclang -fcolor-diagnostics -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -O3 -fvisibility=hidden -Wall -Wpointer-arith -Wunused-parameter -Wsign-compare -Wno-missing-field-initializers -DHAVE_CONFIG_H=1 -D_GNU_SOURCE=1 -DEFL_BETA_API_SUPPORT=1 -DELM_INTERNAL_API_ARGESFSDFEFC=1 -O2 -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -fPIC -pthread '-DPACKAGE_DATA_DIR="/usr/local/share/evas"' -DNEED_RUN_IN_TREE=1 -DEFL_BUILD=1 -MD -MQ src/modules/evas/image_loaders/libshared_loader_avif.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_avif_evas_image_load_avif.c.o -MF src/modules/evas/image_loaders/libshared_loader_avif.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_avif_evas_image_load_avif.c.o.d -o src/modules/evas/image_loaders/libshared_loader_avif.so.p/_wrkdirs_usr_ports_devel_efl_work_efl-1.25.1_src_modules_evas_image_loaders_avif_evas_image_load_avif.c.o -c /wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/avif/evas_image_load_avif.c
/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/avif/evas_image_load_avif.c:68:36: error: too many arguments to function call, expected single argument 'decoder', have 2 arguments
res = avifDecoderParse(decoder, &raw);
~~~~~~~~~~~~~~~~ ^~~~
/usr/local/include/avif/avif.h:722:1: note: 'avifDecoderParse' declared here
avifResult avifDecoderParse(avifDecoder * decoder);
^
/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/src/modules/evas/image_loaders/avif/evas_image_load_avif.c:155:41: error: too many arguments to function call, expected single argument 'decoder', have 2 arguments
res = avifDecoderParse(decoder, &raw);
~~~~~~~~~~~~~~~~ ^~~~
/usr/local/include/avif/avif.h:722:1: note: 'avifDecoderParse' declared here
avifResult avifDecoderParse(avifDecoder * decoder);
^
2 errors generated.
[2546/4604] c++ -o src/examples/eina/eina_hash_07 src/examples/eina/eina_hash_07.p/eina_hash_07.c.o -I/usr/local/include/libepoll-shim -L/usr/local/lib -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wl,--start-group -lepoll-shim -Wl,-rpath,/usr/local/lib -fstack-protector-strong libefl-one.so.1.25.1 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../../..' -Wl,-rpath-link,/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/
[2547/4604] c++ -o src/examples/eina/eina_hash_06 src/examples/eina/eina_hash_06.p/eina_hash_06.c.o -I/usr/local/include/libepoll-shim -L/usr/local/lib -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wl,--start-group -lepoll-shim -Wl,-rpath,/usr/local/lib -fstack-protector-strong libefl-one.so.1.25.1 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../../..' -Wl,-rpath-link,/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/
[2548/4604] c++ -o src/examples/eina/eina_hash_08 src/examples/eina/eina_hash_08.p/eina_hash_08.c.o -I/usr/local/include/libepoll-shim -L/usr/local/lib -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wl,--start-group -lepoll-shim -Wl,-rpath,/usr/local/lib -fstack-protector-strong libefl-one.so.1.25.1 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../../..' -Wl,-rpath-link,/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/
[2549/4604] c++ -o src/examples/eina/eina_list_01 src/examples/eina/eina_list_01.p/eina_list_01.c.o -I/usr/local/include/libepoll-shim -L/usr/local/lib -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wl,--start-group -lepoll-shim -Wl,-rpath,/usr/local/lib -fstack-protector-strong libefl-one.so.1.25.1 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../../..' -Wl,-rpath-link,/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/
[2550/4604] c++ -o src/examples/eina/eina_iterator_01 src/examples/eina/eina_iterator_01.p/eina_iterator_01.c.o -I/usr/local/include/libepoll-shim -L/usr/local/lib -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wl,--start-group -lepoll-shim -Wl,-rpath,/usr/local/lib -fstack-protector-strong libefl-one.so.1.25.1 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../../..' -Wl,-rpath-link,/wrkdirs/usr/ports/devel/efl/work/efl-1.25.1/_build/
ninja: build stopped: subcommand failed.
===> Compilation failed unexpectedly.
Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
the maintainer.
*** Error code 1
Stop.
This may not look like the progress that it is. After eliminating all of the items in the loader section, the culprit that has been there through all of this is more obvious. The next step is to look into whether I can and whether it matters, if devel/libavif is updated to a more recent version. Another possibility is that libavif may need its own options changed so I ticked them all and will see if that solves it. One more thing I noticed in the above output, is that even without the options for those various loader types (ps, raw, etc.) being unticked, I think the build still seems to call on them in the arguments. Adjusting the options for libavif is not as simple as ticking them all, as a couple options are broken (yeah I know, unticking them for default pkg build is not a solution), and it seems I certainly need the decode options set.
No joy. I will have to look at whether a newer version of libavif solves it, but if not then I seem to be at a dead end. The strange part is that if the instructions for building with FreeBSD on the Enlightenment site are accurate, there is no mention of libavif, but I suspect those are out of date too. There is no newer version, so all I can try is other configuration options as the last possible solution, and then I can do no more it seems. Looking at libavif it mentions AOM, and looking at the git site for libavif it also mentions AOM, so I wonder if the dependency is actually multimedia/aom instead. I will try this and see, but there doesn't seem to be much chance that I will get devel/efl built. Unfortunately multimedia/aom as a dependency in the Makefile was not the solution it could have been. I erred in saying that libavif was as current as it could be, I misread the git page for it, version 0.8.4 is available.
The update for devel/libavif needed the version number in the Makefile changed and comment out portrevision line, then hide distinfo and do a fetch, recreate the distinfo with make makesum, and finally hide and update the pkg-plist with make makeplist. The pkg-plist was a little more work than the rest, since it doesn't actually create the file and the result needs to be checked. I compared the old pkg-plist to the new information and adjusted things to match. So now we will have a newer version of one of the dependencies for devel/efl but will this now solve the issue? It seems I can do no more, though I might revisit this in the future or at any point I feel a need to scuff my forehead. Right now I am out of ideas.
During this whole attempt to update Enlightenment I didn't use a seperate poudriere jail as I had suggested at the outset. I also did not make or configure another ports tree just in case for use with the modifications, nor did I revise any other configuration for poudriere as I suggested I might. It all didn't feel necessary since the changes were relatively minor, the ports involved (aside from devel/libavif) do not succeed to build anyhow, and as it turns out, since the project was a failure beyond my ability, any future ports tree update (via svn) will wipe out the modifications, all of them-- although I discovered, a caveat in that things got wonky until I wiped out the libavif directory before the svn update. These are the frustrating updates or porting attempts which elude and evade and deny solution. Maybe an update of something by the developers will solve the issue, I cannot even guess whether what I see is unique to me or an actual bug but it does appear so.
No comments:
Post a Comment
Thank you for your interest!